Claude Haiku vs Sonnet vs Opus vs Free Local Models: Which Is Best for Real Work?
Haiku 5.5 gave me the best value on everyday jobs. Sonnet 5.5 was my pick for changing code. The better local models earned a place on slower work that can run overnight.
I tested 14 jobs from my own work, with 5 runs per task for each model setup. The jobs included fixing a bug, reading server logs, checking commands, writing client emails and planning a live website change. This is what worked on those jobs.
Which model would I use?
Haiku for everyday writing and checks
Haiku 5.5 produced acceptable answers on 70% of the runs. Each acceptable answer cost $0.00136, well under a cent. Sonnet cost about 13x as much per acceptable answer, Opus 30x and Fable 80x.
Haiku wrote a usable client email, site note and commit message in all 5 runs of each task. On a cold email with strict rules against inventing facts, it passed 3 of 5 runs. Sonnet and Fable passed none; Opus passed 1.
Haiku is my pick for small writing jobs, quick checks and routine server questions. I still check the answer before using it.
Sonnet for code changes
Sonnet 5.5 fixed the bug and passed the hidden tests in all 5 runs. Opus 5.5 and Fable 5.1 also went 5 for 5. Sonnet cost about 2 cents per working fix; Opus cost 2x as much and Fable 5x.
Haiku passed the tests it could see, then failed hidden cases in 2 of 5 runs. That matters: code can look finished while still breaking on inputs it never saw. This was one bug-fixing task, so it gives me a reason to prefer Sonnet here, not a verdict on every coding job.
Haiku held up on smaller code tasks. It wrote all 5 commit messages correctly and gave the best PHP security review among the Claude models, passing 4 of 5 runs.
Local models for work that can wait
Qwen 3.8 Flash with my rules and thinking enabled reached 59% acceptable. Sonnet reached 61% and Opus 60%. Qwen took 81.4 seconds per job at the median, compared with about 6 to 10 seconds for Claude.
I use that Qwen setup for overnight reasoning jobs. The one-Spark FP4 build stays available as a spare. For work I am waiting on, I use Claude.
The local runs have no per-call charge, shown as $0 in the results. I already paid for the hardware, and those figures do not include the cost of owning or running it.
Did the more expensive Claude models do better?
Sonnet 5.5 was the fastest Claude model at a 6-second median. Haiku took 8.1 seconds and gave more acceptable answers overall: 70% versus 61%. Sonnet was the better choice for code changes and deciding which lessons were worth saving.
Opus 5.5 reached 60% acceptable, close to Sonnet's 61%, but cost about 2.3x more per acceptable answer. It was the only Claude model to get the firewall incident fully right even once, passing 1 of 5 runs. That result needs the context of the local-model tests below: tuned Qwen passed 3 of 5, using a prompt informed by earlier failures.
Fable 5.1 led the Claude code group at 87% acceptable. It was also the slowest Claude model at the slow end: about 23 seconds for the slowest 10% of runs. At about 11 cents per acceptable answer, it cost 80x as much as Haiku.
Passing automatic checks did not always mean the answer was useful. Fable passed every automatic check on 89% of its Claude runs, followed by Opus at 86%, Haiku at 83% and Sonnet at 77%. Haiku did better after the quality review because the larger models more often added unsupported causes, promises or claims.
I tested Qwen 3.8 Flash on NVIDIA DGX Sparks, plus Ornith 1.5, Recursive Flint 40B and Nanbeige 4.3 33B on Mac Studios. Each setup faced the same 14 jobs, run 5 times each. The setup mattered as much as the model name.
Qwen 3.8 Flash on two NVIDIA DGX Sparks
Qwen reached 30% acceptable without my extra rules. Adding the rules with thinking off scored 26%. Adding both the rules and thinking raised it to 59%, with an 81-second median.
That tuned setup passed the firewall incident 3 of 5 times. It went 5 for 5 on the PHP security review, Todoist closeout and commit messages, but never fixed the code bug.
A 2,000-token thinking cap kept the same 59% score and cut the slowest jobs from 443 seconds to 118. Tokens are pieces of text the model processes or generates. Before the cap, it typically generated about 9,000 thinking tokens for a 250-word plan and still failed the task.
I also tested NVIDIA's Qwen 3.8 Flash Next FP4 Local checkpoint on one Spark. It scored 30% without extra rules at a 26.5-second median. With rules and a 500-token thinking cap, it reached 51% at 80.9 seconds. The older two-Spark setup with the same 500-token cap reached 57% at 55.2 seconds: 6 percentage points higher and about 26 seconds faster. The one-Spark build did not replace it.
Recursive Flint 40B on a Mac Studio
Flint reached 51% acceptable, the best of the local models added on October 30. It went 5 for 5 on command safety checks, the site note, commit messages and the cold email. Its cold emails followed the rule against inventing facts every time; Haiku passed 3 of 5 and Sonnet none.
It passed none of the bot-storm log, firewall incident, memory decisions, change-plan or mail-diagnosis tasks. Median time was 78 seconds, and 4 runs failed.
My first run used model-card settings intended for small Macs. Changing those settings raised the score from 44% to 51%. The slowest 10% of jobs dropped from 647 seconds to 294.
Ornith 1.5 122B on a Mac Studio with 128 GB
Ornith scored 44% without my extra rules and 40% with rules and thinking. Across seven tuned runs, it ranged from 34% to 47%. I tried a shorter rules prompt, facts-only instructions, a safe-change checklist, different thinking limits, randomness on and off, and a faster number format. None clearly beat the untuned result.
Tuning raised its average judge score from 3.31 to 3.77 out of 5, but did not raise its acceptable rate. It passed every Todoist closeout, 5 of 5, which no Claude model did. It can also read screenshots, which I use when checking website pages. Median time was about 1 minute per job.
Ornith 1.5 35B on a Mac Studio
The smaller Ornith scored 26% acceptable. It went 5 for 5 on deciding what to save to memory and fixed the code bug 2 of 5 times, but was weak on most of the other jobs. The 122B version replaced it for this work.
Nanbeige 4.3 33B on a Mac Studio
Nanbeige scored 34% acceptable. It was the slowest model I tested: a 141-second median, with the slowest 10% of jobs taking about 15 minutes.
It went 5 for 5 on command safety checks and catching a false MainWP dashboard success. It also ignored the setting to turn thinking off, and 6 runs failed outright. I removed it from my hardware.
What the test can tell you
An acceptable answer had to pass every automatic check and the required blind quality reviews. The checks included facts, word limits and hidden code tests. A high average judge score alone was not enough.
Some jobs still need more work. None of the Claude models produced an acceptable Todoist closeout: each claimed the backup happened “first” without evidence. Local Qwen and Ornith later passed that task. Only Opus passed the original Claude incident test, once in 5 runs. No model passed the live-change plan; 19 of the 20 Claude attempts exceeded its word limit. Tighter prompts or templates are a possible fix, not a proven one.
The local comparisons need two qualifications. Some rules and templates were written after I saw these exact tasks fail. The tuned Ornith settings were also chosen using these tasks, so those are best-case results for this test. Claude and the local models also used different processes for settling disputed judge scores. The full method is below.
I did not test Opus 5.6 or Mythos 5.1 because the Claude CLI on this account rejected both names. These results describe the versions and setups I ran, not every model available today.
My picks from this test are Haiku for small jobs, Sonnet for code changes, and tuned Qwen for overnight reasoning. I plan to rerun the same 14 frozen tasks when testing new releases, and to retest the tasks that need better prompts.
The full score tables, detailed test method, prompts and model answers are below. Expand this section to inspect the evidence behind the article.
The per-job picks compare Claude models only. Local models stay in the overall table, but their $0 API cost would dominate near-ties without accounting for their slower responses or hardware costs.
Show all scores, test details, prompts and model answers
All 14 model setups: 14 jobs, 5 runs per job
#
Model
Acceptable
Codex judge (1-5)
Median time
Tokens in
Tokens out
Cost per run
Cost per acceptable
Blake’s blind score
In one line
1
Haiku 5.5
70%
4.12
8.1s
5,736
1,319
$0.0010
$0.0014
–
Lowest cost per acceptable answer in this test; missed some hidden code cases.
2
Sonnet 5.5
61%
3.58
6.0s
4,935
570
$0.0110
$0.0178
–
Fastest median response; my pick for code changes and memory decisions.
3
Opus 5.5
60%
3.75
8.4s
5,296
713
$0.0248
$0.0414
–
60% acceptable; cost 30x as much as Haiku per acceptable answer.
4
Qwen 3.8 Flash + rules + thinking (open)
59%
4.08
81.4s
32,899
1,697
$0.0000
$0.0000
–
59% acceptable, with an 81.4-second median. I use it for overnight work.
5
Fable 5.1
53%
3.42
10.1s
5,263
588
$0.0578
$0.1093
–
Led the Claude code group; highest cost per acceptable answer.
26% acceptable with rules and thinking off, versus 30% without the extra rules.
Claude recommendations by task
Job
Pick
Runner-up
Why
Code: fix, review, commit
Haiku 5.5
Fable 5.1
80% acceptable at $0.0012 each, 8.4s median. Fable 5.1 hit 87% but costs 63.9x per acceptable answer.
Ops: logs, incidents, safety, mail, false success
Haiku 5.5
Sonnet 5.5
80% acceptable at $0.0016 each, 8.7s median.
Writing: Todoist, client email, site notes, cold email
Haiku 5.5
Opus 5.5
65% acceptable at $0.0009 each, 5.6s median. Recursive Flint 40B (open) hit 90% with no per-call API charge. Local models are excluded from these Claude picks.
Judgment: memory calls, risky-change plans
Haiku 5.5
Sonnet 5.5
40% acceptable at $0.0019 each, 6.5s median. Sonnet 5.5 hit 50% but costs 10.4x per acceptable answer.
W01-codefix: fix a bug so the tests pass (agentic)
Sonnet 5.5
Opus 5.5
100% acceptable at $0.0238 each, 9.2s median.
W02-logstorm: find the cause of a load spike in an access log (agentic)
Haiku 5.5
–
100% acceptable at $0.0026 each, 15.4s median.
W03-incident: triage a server incident from a journal excerpt
Opus 5.5
–
20% acceptable at $0.0909 each, 8.8s median. Qwen 3.8 Flash + rules + thinking (open) hit 60% with no per-call API charge. Local models are excluded from these Claude picks.
W04-preflight: safety-check shell commands before running them
Haiku 5.5
Sonnet 5.5
100% acceptable at $0.0009 each, 7.9s median.
W05-phpreview: security review of a WordPress plugin snippet
Haiku 5.5
–
80% acceptable at $0.0013 each, 9.3s median. Qwen 3.8 Flash + rules + thinking (open) hit 100% with no per-call API charge. Local models are excluded from these Claude picks.
W06-todoist: Todoist closeout comment in 7th-grade language
Nobody yet
–
No model produced an acceptable answer; needs a human.
W07-clientemail: client email as Blake about a delay and the estimate
Haiku 5.5
Opus 5.5
100% acceptable at $0.0003 each, 3.2s median.
W08-sitenote: site-doc note from raw work facts
Haiku 5.5
Sonnet 5.5
100% acceptable at $0.0006 each, 5.6s median.
W09-commitmsg: commit message from a diff
Haiku 5.5
Sonnet 5.5
100% acceptable at $0.0003 each, 2.6s median.
W10-coldemail: cold email to a local business (no invented facts)
Haiku 5.5
–
60% acceptable at $0.0014 each, 7.8s median. Recursive Flint 40B (open) hit 100% with no per-call API charge. Local models are excluded from these Claude picks.
W11-memorygate: decide which lessons are worth saving to memory
Sonnet 5.5
Fable 5.1
100% acceptable at $0.0045 each, 4.2s median.
W12-plan: plan a risky live change with backup, verify and rollback
Nobody yet
–
No model produced an acceptable answer; needs a human.
W13-falsesuccess: catch a dashboard 'success' that isn't true (agentic)
Haiku 5.5
Sonnet 5.5
100% acceptable at $0.0011 each, 8.3s median.
W14-maildiag: diagnose why site mail lands in spam
Haiku 5.5
Sonnet 5.5
100% acceptable at $0.0009 each, 8.3s median.
Detailed test method
The jobs and the runs
I used 14 frozen tasks, called workflow-v1.1, copied from daily work: a bug fix, a bot-storm access log, a firewall incident, command safety checks, a PHP security review, a Todoist closeout, a client email about hours, a site note, a commit message, a cold email, memory decisions, a WordPress core update plan, catching a false MainWP dashboard success, and a mail problem involving DMARC/DKIM email authentication.
Each model ran each task 5 times in a clean Claude Code session. There was no CLAUDE.md, saved memory or external tool connection, and one short system prompt. Tasks that required actions got Bash, Read and Edit tools in a fresh copy of the test files.
Time means elapsed wall-clock time. Token counts and costs came from the command-line program's own usage report, using list prices. A median is the middle result. The slowest-10% figures describe how long the slower runs took.
How an answer passed
An acceptable answer had to pass every automatic check, including required facts, exact counts, word limits and hidden unit tests. It also had to pass the blind quality review with a score of 4 or 5 out of 5.
Codex, using GPT, scored every answer twice. Answers were shuffled differently each time, and model names were hidden. For Claude, 35 answers split across the pass line. Claude reviewed those answers blind, then Claude and Codex discussed each one. They agreed on 18. Claude conceded the other 17, which involved unverified claims about when backups happened.
Codex also checked the test design before the run. It found loose checks and a broken mail scenario, which were fixed. It then fact-checked the verdict.
The per-job pick is the cheapest Claude model per acceptable answer among those within 10 percentage points of the highest acceptable rate. Local models are excluded from those picks. Their $0 API cost would win near-ties without accounting for response time or hardware.
October 16 local-model setup
Local runs used the same clean Claude Code session, connected to my own gateways instead of Anthropic. Qwen 3.8 Flash used NVFP4 on two DGX Sparks with vLLM. I tested it without extra rules, with my cached rules and thinking off, and with the rules and thinking on, capped at 2,000 thinking tokens.
The cached rules prompt was about 13,000 tokens: worker rules, my agent instructions and the memory index. Ornith 1.5 35B used 4-bit MLX on a Mac Studio, with a small voice adapter trained on my writing. Its untuned run had thinking on.
October 23 FP4 retest
The one-Spark test used NVIDIA's QAD FP4 checkpoint and a model-specific vLLM B12X build. Technical settings were NVFP4 kernels, four-token MTP speculative decoding, FP8 KV cache, prefix caching and a 262,144-token context limit. It used the same 14 frozen tasks, 5 runs per task and two blind, shuffled Codex judge passes.
October 30 local-model setup
Ornith 1.5 122B used official 4-bit MLX on a Mac Studio with 128 GB. I ran it without extra rules, then with a shorter rules prompt of about 5,400 tokens, an 8,192-token thinking cap and temperature 0.
Recursive Flint 40B used official 4-bit GGUF on llama.cpp. Nanbeige 4.3 33B was converted to 4-bit MLX. Both ran without extra rules on the same Mac Studio, through my gateway and the clean Claude Code session. Flint's published numbers come from the second run, after I changed settings intended for small Macs.
Limits of the comparison
The rules prompt includes short templates for Todoist closeouts, incident triage and change plans. I wrote those templates after seeing these exact jobs fail, so those three local results are not blind tests of an unfamiliar task.
I also tuned Ornith with rules and thinking across seven runs, changing one setting at a time. Its acceptable rate ranged from 34% to 47%. The table shows the setup I run today, which scored 40%. Because I tuned it on these same 14 jobs, treat that result as a best case.
The judging processes also differ. Claude's 35 split decisions had the extra discussion round described above. Local answers had only the two blind Codex passes, with both required to score 4 or better. The local answers did not have a Claude settlement round.
Every task and every answer
Each card is run 1 of 5, best score first. Green = acceptable (every auto-check passed and the judges gave 4+), red = not. Blake's own blind scores appear as he rates answers.
Fix a bug so the tests pass (agentic)
Pick: Sonnet 5.5
The prompt every model got
In this folder, frontmatter.py parses the front matter of a site doc, but test_frontmatter.py fails. Fix frontmatter.py so `python3 -m unittest test_frontmatter` passes. Do not edit the test file. When done, reply with one sentence saying what you changed.
Haiku 5.5
5/5
8.1 s · 21,094 tokens in / 1,354 out · $0.0016 · 67% auto-checks
Read the answer
I rewrote `parse()` in frontmatter.py to skip the `<!-- ... -->` header block, split only on the first colon, parse `[...]` lists, strip quotes, and convert digit values to ints, so `python3 -m unittest test_frontmatter` now passes all 8 tests.
--- final frontmatter.py ---
def _convert(val):
"""Convert a raw scalar/list string from the front matter into a Python value."""
if val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
if not inner:
return []
return [item.strip() for item in inner.split(",")]
if len(val) >= 2 and val[0] == val[-1] and val[0] in ("'", '"'):
return val[1:-1]
if val.isdigit():
return int(val)
return val
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_comment = False
for line in text.splitlines():
stripped = line.strip()
if in_comment:
if "-->" in stripped:
in_comment = False
continue
if stripped.startswith("<!--"):
if "-->" not in stripped:
in_comment = True
continue
if stripped == "---":
break
if ":" not in stripped:
continue
key, val = stripped.split(":", 1)
out[key.strip()] = _convert(val.strip())
return out
Opus 5.5
5/5
10.5 s · 19,609 tokens in / 783 out · $0.0773 · 100% auto-checks
Read the answer
I fixed `frontmatter.py` so it splits each line only at the first colon, skips the `<!-- … -->` header comment, and turns values into the right types (quoted strings, `[...]` lists including empty ones, and integers), and all 8 tests in `python3 -m unittest test_frontmatter` now pass.
--- final frontmatter.py ---
def _value(raw):
"""Convert a raw front-matter value string into a Python value."""
val = raw.strip()
if len(val) >= 2 and val[0] == val[-1] and val[0] in "\"'":
return val[1:-1]
if val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
if not inner:
return []
return [_value(item) for item in inner.split(",")]
if val.lstrip("-").isdigit():
return int(val)
return val
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_comment = False
for line in text.splitlines():
stripped = line.strip()
if in_comment:
if "-->" in stripped:
in_comment = False
continue
if stripped.startswith("<!--"):
if "-->" not in stripped:
in_comment = True
continue
if stripped == "---":
break
if ":" not in line:
continue
key, val = line.split(":", 1)
out[key.strip()] = _value(val)
return out
Fable 5.1
5/5
11.5 s · 19,691 tokens in / 891 out · $0.1978 · 100% auto-checks
Read the answer
I rewrote `parse()` in frontmatter.py to skip the `<!-- ... -->` header comment, split each line on only the first colon, and coerce values (quoted strings, `[]` lists, and integers), so all 8 tests now pass.
--- final frontmatter.py ---
def _coerce(val):
"""Turn a raw front-matter value string into a Python value."""
val = val.strip()
if len(val) >= 2 and val[0] == val[-1] and val[0] in "\"'":
return val[1:-1]
if val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
if not inner:
return []
return [_coerce(item) for item in inner.split(",")]
try:
return int(val)
except ValueError:
return val
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_comment = False
for line in text.splitlines():
stripped = line.strip()
if in_comment:
if "-->" in stripped:
in_comment = False
continue
if stripped.startswith("<!--"):
if "-->" not in stripped:
in_comment = True
continue
if stripped == "---":
break
if ":" not in line:
continue
key, val = line.split(":", 1)
out[key.strip()] = _coerce(val)
return out
Recursive Flint 40B (open)
5/5
102.7 s · 22,234 tokens in / 1,910 out · $0.0000 · 67% auto-checks
Read the answer
All 8 tests pass now — I fixed `frontmatter.py` to skip the `<!-- SITEDOC-HEADER v1 ... -->` comment block, split keys/values on the first colon only, coerce values into typed forms (empty lists, flag lists, quoted strings, ints), and stop parsing at the `---` front-matter delimiter.
--- final frontmatter.py ---
def _coerce(val):
"""Convert a raw front-matter string value into its natural type."""
val = val.strip()
if val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
if not inner:
return []
return [v.strip().strip('"').strip("'") for v in inner.split(",") if v.strip()]
if len(val) >= 2 and val[0] == val[-1] and val[0] in "\"'":
val = val[1:-1]
try:
return int(val)
except ValueError:
return val
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_comment = False
for line in text.splitlines():
stripped = line.strip()
if in_comment:
if "-->" in stripped:
in_comment = False
continue
if stripped.startswith("<!--"):
if "-->" not in stripped:
in_comment = True
continue
if stripped == "---":
break
if not stripped or ":" not in stripped:
continue
key, val = stripped.split(":", 1)
key = key.strip()
if not key:
continue
out[key] = _coerce(val)
return out
Nanbeige 4.3 33B (open)
4.5/5
244.3 s · 25,871 tokens in / 2,193 out · $0.0000 · 67% auto-checks
Read the answer
Fixed `frontmatter.py` so `parse()` skips leading `<!-- ... -->` comment blocks, splits key/value on the first colon only, strips surrounding quotes, converts `[...]` to lists and numeric values to `int`, and still stops at the `---` delimiter so the body is ignored — `python3 -m unittest test_frontmatter` now passes all 8 tests.
--- final frontmatter.py ---
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_comment = False
for line in text.splitlines():
if in_comment:
if line.strip().startswith("-->"):
in_comment = False
continue
if line.lstrip().startswith("<!--"):
in_comment = True
continue
if line.strip() == "---":
break
if ":" not in line:
continue
key, val = line.split(":", 1)
key = key.strip()
val = val.strip()
if val.startswith("[") and val.endswith("]"):
out[key] = [item.strip().strip("'\"")
for item in val[1:-1].split(",") if item.strip()]
elif val.startswith('"') and val.endswith('"'):
out[key] = val[1:-1]
elif val.lstrip("-").isdigit():
out[key] = int(val)
else:
out[key] = val
return out
Ornith 1.5 35B (open)
4.5/5
50.4 s · 20,210 tokens in / 1,820 out · $0.0000 · 100% auto-checks
Read the answer
All 8 tests pass; I rewrote `parse` to skip the `<!-- -->` header block, stop at the `---` separator, split on the first colon only, and coerce quoted strings, inline lists, and integers.
--- final frontmatter.py ---
def _coerce(val):
"""Coerce a scalar/list token into a Python value."""
if val == "[]":
return []
# strip surrounding single/double quotes
if len(val) >= 2 and val[0] == val[-1] and val[0] in ("'", '"'):
return val[1:-1]
# inline list
if val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
if not inner:
return []
return [_coerce(part.strip()) for part in inner.split(",")]
try:
return int(val)
except ValueError:
return val
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_header = False
for line in text.splitlines():
stripped = line.strip()
if stripped.startswith("<!--"):
in_header = True
continue
if stripped == "-->":
in_header = False
continue
if in_header:
continue
if stripped == "---":
break
if ":" not in line:
continue
key, val = line.split(":", 1)
out[key.strip()] = _coerce(val.strip())
return out
Sonnet 5.5
4/5
9.7 s · 18,934 tokens in / 932 out · $0.0393 · 100% auto-checks
Read the answer
I rewrote `parse` in `frontmatter.py` so it skips the `<!-- ... -->` header comment, splits each line only on the first colon, and converts values (quoted strings, `[...]` lists, integers). All 8 tests in `python3 -m unittest test_frontmatter` now pass.
--- final frontmatter.py ---
def _value(val):
val = val.strip()
if len(val) >= 2 and val[0] == val[-1] and val[0] in "\"'":
return val[1:-1]
if val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
if not inner:
return []
return [_value(v) for v in inner.split(",")]
if val.lstrip("-").isdigit():
return int(val)
return val
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_comment = False
for line in text.splitlines():
s = line.strip()
if in_comment:
if "-->" in s:
in_comment = False
continue
if s.startswith("<!--"):
if "-->" not in s:
in_comment = True
continue
if s == "---":
break
if ":" not in line:
continue
key, val = line.split(":", 1)
out[key.strip()] = _value(val)
return out
Qwen 3.8 Flash + rules + thinking (open)
4/5
109.5 s · 92,692 tokens in / 2,316 out · $0.0000 · 67% auto-checks
Read the answer
All 8 tests pass. I rewrote `parse` in frontmatter.py to skip HTML-comment header lines, stop at the `---` body marker, split each line on only the first colon, strip surrounding quotes, convert `[a, b]` values into lists (and `[]` into an empty list), and convert plain integer values to `int`.
--- final frontmatter.py ---
def _coerce(val):
"""Turn a raw front-matter value into str, int, or list."""
if len(val) >= 2 and val.startswith('"') and val.endswith('"'):
return val[1:-1]
if val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
if not inner:
return []
return [item.strip() for item in inner.split(",")]
try:
return int(val)
except ValueError:
return val
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_comment = False
for line in text.splitlines():
line = line.strip()
if in_comment:
if "-->" in line:
in_comment = False
continue
if line.startswith("<!--"):
if "-->" not in line:
in_comment = True
continue
if line == "---":
break
if ":" not in line:
continue
# Split once: values like "cache: breeze" keep their colons.
key, val = line.split(":", 1)
if not key.strip():
continue
out[key.strip()] = _coerce(val.strip())
return out
141.3 s · 91,924 tokens in / 1,330 out · $0.0000 · 67% auto-checks
Read the answer
All 8 tests pass. I rewrote `parse` in frontmatter.py to split each line only on the first colon (so values keep later colons, like `server` and `note`), skip `<!-- ... -->` header-comment blocks, stop at the `---` line so the body is never read, strip surrounding quotes, convert `[a, b]` values into lists (`[]` becomes an empty list), and turn all-digit values into ints.
Ornith 1.5 122B, raw (open)
4/5
82.2 s · 24,833 tokens in / 1,375 out · $0.0000 · 100% auto-checks
Read the answer
All 8 tests pass. I rewrote `frontmatter.py` to skip the HTML header comment block, split keys on the first colon only, and coerce values (quoted strings, `[...]` inline lists, and integers) so the parsed dict matches the test's expectations.
--- final frontmatter.py ---
def _coerce(val):
val = val.strip()
if val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
if not inner:
return []
items = []
for part in inner.split(","):
items.append(_scalar(part.strip()))
return items
return _scalar(val)
def _scalar(val):
if (val.startswith('"') and val.endswith('"')) or (
val.startswith("'") and val.endswith("'")
):
return val[1:-1]
try:
return int(val)
except ValueError:
pass
return val
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_comment = False
for line in text.splitlines():
stripped = line.strip()
if in_comment:
if "-->" in line:
in_comment = False
continue
if stripped.startswith("<!--"):
if "-->" not in line:
in_comment = True
continue
if stripped == "---":
break
if ":" not in line:
continue
key, val = line.split(":", 1)
out[key.strip()] = _coerce(val)
return out
Ornith 1.5 122B + rules + thinking (open)
4/5
195.3 s · 65,369 tokens in / 2,330 out · $0.0000 · 67% auto-checks
Read the answer
All 8 tests pass. I rewrote `frontmatter.py` to strip the HTML comment block, split each line on the first colon only, and convert values into the right types (quoted strings, `[]`/comma lists, ints, and plain strings).
--- final frontmatter.py ---
import re
def _parse_value(val):
if val.startswith('"') and val.endswith('"'):
return val[1:-1]
if val.startswith('[') and val.endswith(']'):
inner = val[1:-1].strip()
if not inner:
return []
return [item.strip() for item in inner.split(',')]
try:
return int(val)
except ValueError:
return val
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
text = re.sub(r'<!--.*?-->', '', text, flags=re.DOTALL)
out = {}
for line in text.splitlines():
if line.strip() == '---':
break
if ':' not in line:
continue
key, val = line.split(':', 1)
out[key.strip()] = _parse_value(val.strip())
return out
Qwen 3.8 Flash, raw (open)
4/5
53.5 s · 23,003 tokens in / 725 out · $0.0000 · 67% auto-checks
Read the answer
All 8 tests pass. I rewrote `frontmatter.py` to skip the leading HTML comment header, split each line on only the first colon, stop at the `---` terminator, and coerce values into proper types (quoted strings, empty/populated bracketed lists, and integers).
--- final frontmatter.py ---
import re
def parse(text):
"""Parse the front matter at the top of a site doc into a dict.
Skips any leading HTML comment header, stops at the closing '---', and
converts quoted strings, bracketed lists, and integers to Python values.
"""
out = {}
lines = text.splitlines()
i = 0
# Skip a leading HTML comment header (e.g. <!-- SITEDOC-HEADER v1 ... -->).
if lines and lines[0].lstrip().startswith("<!--"):
while i < len(lines) and "-->" not in lines[i]:
i += 1
i += 1
for line in lines[i:]:
stripped = line.strip()
if stripped == "---":
break
if ":" not in line:
continue
key, val = line.split(":", 1)
out[key.strip()] = _coerce(val.strip())
return out
def _coerce(val):
if len(val) >= 2 and val[0] == val[-1] and val[0] in "\"'":
return val[1:-1]
if val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
if not inner:
return []
return [item.strip() for item in inner.split(",")]
if re.fullmatch(r"-?\d+", val):
return int(val)
return val
Qwen 3.8 FP4 Local, raw (1 Spark)
4/5
106.5 s · 46,375 tokens in / 1,160 out · $0.0000 · 67% auto-checks
Read the answer
All 8 tests pass. I rewrote `parse` in frontmatter.py to split keys/values on only the first colon, skip `<!-- ... -->` comment blocks entirely, and convert values — stripping quotes, parsing `[...]` into lists, and casting integers — so lists, quoted colons, and ints are handled correctly.
Qwen 3.8 Flash + my rules (open)
4/5
70.6 s · 91,279 tokens in / 792 out · $0.0000 · 67% auto-checks
Read the answer
All 8 tests pass. I changed frontmatter.py to split each line on only the first colon, skip HTML-comment header lines, strip surrounding quotes, parse `[...]` values as lists (empty `[]` stays an empty list), and convert plain digit values to integers.
--- final frontmatter.py ---
def parse(text):
"""Parse the YAML-ish front matter at the top of a site doc into a dict."""
out = {}
in_comment = False
for line in text.splitlines():
if line.strip() == "---":
break
if "<!--" in line:
in_comment = "-->" not in line
continue
if in_comment:
if "-->" in line:
in_comment = False
continue
if "-->" in line:
continue
if ":" not in line:
continue
key, val = line.split(":", 1)
val = val.strip()
if len(val) >= 2 and val[0] == val[-1] and val[0] in "\"'":
val = val[1:-1]
elif val.startswith("[") and val.endswith("]"):
inner = val[1:-1].strip()
val = [item.strip() for item in inner.split(",")] if inner else []
elif val.isdigit():
val = int(val)
out[key.strip()] = val
return out
Find the cause of a load spike in an access log (agentic)
Pick: Haiku 5.5
The prompt every model got
web02 load spiked this morning. access.log in this folder is the site's log for that window. Find what caused the spike. Reply with: the exact User-Agent string to block, the exact number of 404 responses it caused, the IPs it came from, and one sentence on why blocking it will not hurt real Google crawling.
Ornith 1.5 122B + rules + thinking (open)
5/5
260.0 s · 132,116 tokens in / 3,500 out · $0.0000 · 100% auto-checks
Read the answer
**User-Agent to block (exact string):**
`Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0`
**404 responses it caused:** 1089 — every single request from this UA returned 404 (1089 of 1089).
**IPs it came from (3 total):**
- 185.191.171.13 (391 requests)
- 185.191.171.4 (357 requests)
- 185.191.171.9 (341 requests)
**Why blocking it won't hurt real Google crawling:** Real Googlebot's User-Agent is exactly `Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)` with no extra text and comes from Google's `66.249.66.x` range (in this log: 171 requests, all HTTP 200) — it never appends ` Chrome/99.0`, so blocking only that suffixed string leaves genuine Googlebot untouched.
Nanbeige 4.3 33B (open)
5/5
571.3 s · 86,678 tokens in / 6,067 out · $0.0000 · 75% auto-checks
Read the answer
Found it. The spike was a flood of requests for nonexistent pages (`/tag-…/`, `/shop-…/`, `/missing-page/`) from a spoofed Googlebot User-Agent — 1,089 of the window's 1,250 total 404s.
**1. Exact User-Agent string to block:**
```
Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0
```
**2. Exact number of 404 responses it caused: 1,089** (every single request from this UA in the log returned 404 — it caused 1,089 of the window's 1,250 total 404s).
**3. IPs it came from:**
- `185.191.171.13` — 391 requests
- `185.191.171.4` — 357 requests
- `185.191.171.9` — 341 requests
**4. Why blocking it won't hurt real Google crawling:** Real Googlebot identifies itself with the plain `Googlebot/2.1` User-Agent (no `Chrome/99.0` browser string appended) from Google-owned IPs that can be verified via reverse DNS, so blocking this exact spoofed string — or the three offending IPs — removes only the fraudulent traffic while genuine Google crawling continues unaffected.
For context on the diagnosis: the log shows two distinct Googlebot signatures — the plain `Googlebot/2.1` UA (171 requests, all 200s on real pages like `/blog/`, `/contact/`) versus the `Googlebot/2.1 … Chrome/99.0` hybrid (1,089 requests, all 404s on random `/tag-*` and `/shop-*` paths) from the three `185.191.171.x` IPs. The hybrid is a fake scraper masquerading as Googlebot, and blocking it should be scoped to that exact UA string (or those IPs) so the legitimate crawler is untouched.
Haiku 5.5
4.5/5
16.2 s · 36,232 tokens in / 3,060 out · $0.0028 · 100% auto-checks
Read the answer
The spike came from a fake Googlebot. It sent 1,089 requests (45% of the log's 2,400) between 03:00 and 06:59, all returning 404.
- **User-Agent to block:** `Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0`
- **404s it caused:** 1,089 (87% of the log's 1,250 404s)
- **IPs:** 185.191.171.13 (391 requests), 185.191.171.4 (357), 185.191.171.9 (341). All three are in 185.191.171.0/24.
- **Why blocking won't hurt real Google crawling:** The genuine Googlebot UA (without the `Chrome/99.0` suffix) came from 66.249.x.x addresses and got 200 responses on every request in this log, and it produced zero 404s, so the spoofed string is the only traffic that matches the block.
I haven't confirmed the three IPs with a reverse DNS lookup, so run `host` on them before blocking to be sure they don't resolve to googlebot.com or google.com.
Qwen 3.8 Flash + rules + thinking (open)
3/5
182.7 s · 201,211 tokens in / 3,905 out · $0.0000 · 100% auto-checks
Read the answer
**What caused the spike:** a fake Googlebot crawler storm. In the 03:00–07:00 log, 1,250 of 2,400 requests were 404s, and one bogus bot accounts for most of them, hammering made-up URLs like `/product-14009/`, `/shop-19987/`, `/tag-99955/` (never seen on a real site) about once every 1-2 seconds.
- **Exact User-Agent to block:** `Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0`
- **404s it caused:** 1,089 (every one of its 1,089 requests was a 404)
- **IPs it came from:** 185.191.171.13 (391 reqs), 185.191.171.4 (357), 185.191.171.9 (341) — all in 185.191.171.0/24, which is not Google space
**Why blocking it will not hurt real Google crawling:** the log's genuine Googlebot requests all use the real UA string with nothing after `bot.html)` (no ` Chrome/99.0` tail) and all come from Google's own 66.249.66.* range (171 requests, all 200s), so an exact-match block on this spoofed string leaves every real Googlebot hit untouched. This matches the known Fake-Crawler 404 Storm pattern (memory: `reference_fake_crawler_404_load_spike.md`), where the 404 storm itself is what bogs the box down.
Ornith 1.5 122B, raw (open)
3/5
88.1 s · 30,496 tokens in / 1,485 out · $0.0000 · 100% auto-checks
Read the answer
**User-Agent to block:**
```
Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0
```
**404s caused:** 1,089 (every single one of its 1,089 requests was a 404)
**Source IPs:** 185.191.171.4, 185.191.171.9, 185.191.171.13
**Why blocking is safe:** Real Googlebot's User-Agent is exactly `Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)` with no suffix and crawls from Google's `66.249.66.0/24` range (all 200s on real pages), whereas this impostor appends `Chrome/99.0` and hammer-floods random `/product-XXXXX/` and `/shop-XXXXX/` paths that don't exist — so blocking the fake string (and/or the 185.191.171.0/24 range) removes the load spike without touching genuine Google crawlers.
Sonnet 5.5
2.5/5
10.5 s · 20,320 tokens in / 845 out · $0.0445 · 100% auto-checks
Read the answer
**Cause:** A fake Googlebot sent 1,089 requests, and every one returned a 404. The requests were for nonexistent `/product-NNNNN/` URLs, and WordPress rendered a full 404 page for each. Real Googlebot made 171 requests in the same window, all 200s.
**User-Agent to block (exact):**
```
Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0
```
**404 responses from it:** 1,089. That is every request with this UA. The 404s from ordinary browser UAs total 161 and are normal background noise.
**IPs:**
- 185.191.171.13: 391 requests
- 185.191.171.4: 357 requests
- 185.191.171.9: 341 requests
**Why blocking is safe:** Real Googlebot sends the UA string without the trailing `Chrome/99.0` and comes from Google's 66.249.66.x range. It got only 200s in this log, so a rule matching the exact fake string, or those three IPs, won't affect it.
I only checked the log. I didn't run a reverse-DNS check on the IPs.
Opus 5.5
2.5/5
18.5 s · 36,769 tokens in / 1,393 out · $0.0732 · 100% auto-checks
Read the answer
The spike came from a scraper pretending to be Googlebot. It made 1,089 of the log's 2,400 requests (45%), between 03:00:01 and 06:59:58, and every one of them got a 404. It was requesting made-up URLs like `/product-14009/` and `/shop-91782/`, and WordPress has to fully render a page for each 404, which is what drove the load up.
**User-Agent to block (exact string):**
```
Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0
```
**404s it caused:** 1,089 (all of its requests; it got no other status code).
**Source IPs:** all three sent only this User-Agent.
- 185.191.171.13: 391 requests
- 185.191.171.4: 357 requests
- 185.191.171.9: 341 requests
**Why blocking it won't hurt real Google crawling:** Real Googlebot in this log comes from Google's 66.249.66.x range with the standard string, which has no trailing ` Chrome/99.0`. Those 171 requests all returned 200 and are not matched by an exact-string block on the fake User-Agent.
I didn't run reverse-DNS checks on any of these IPs; the conclusion comes from the log alone. Since the scraper can change its User-Agent easily, I'd also block the three IPs (or `185.191.171.0/24`).
Fable 5.1
2/5
36.5 s · 24,334 tokens in / 1,936 out · $0.2680 · 100% auto-checks
Read the answer
**Cause of the spike:** a fake-Googlebot scanner hammering non-existent WordPress URLs (`/product-NNNNN/`, `/tag-NNNNN/`, `/shop-NNNNN/`, etc.) continuously from 03:00:01 to 06:59:58. Every request forced WordPress to render a full 404 page (~8.6 KB, uncached), which is what drove the load. It accounted for 1,089 of the 2,400 requests in the window (45%).
**User-Agent to block (exact string):**
```
Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0
```
**404s it caused:** **1,089** (every single request from this UA was a 404 — zero 200s).
**Source IPs:**
- `185.191.171.13` — 391 requests
- `185.191.171.4` — 357 requests
- `185.191.171.9` — 341 requests
All three reverse-resolve to `*.bl.bot.semrush.com`, not Google. Blocking the whole `185.191.171.0/24` range at the firewall is reasonable in addition to the UA rule.
**Why blocking it won't hurt real Google crawling:** Real Googlebot in this same log used the distinct string `Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)` with no `Chrome/99.0` suffix, came exclusively from `66.249.66.x` addresses that reverse-resolve to `crawl-66-249-66-*.googlebot.com`, and got 171/171 `200` responses — so an exact-match rule on the fake string (or an IP block on 185.191.171.x) touches none of Google's traffic.
241.0 s · 132,089 tokens in / 2,462 out · $0.0000 · 100% auto-checks
Read the answer
**Cause:** a fake-crawler 404 storm. Almost every 404 in the window came from one impostor bot hammering URLs that don't exist (`/shop-N/`, `/tag-N/`, `/product-N/`, `/old-N/`).
**User-Agent to block (exact string):**
`Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0`
**404 responses it caused:** 1089 (every one of its 1089 hits was a 404).
**IPs it came from:**
- 185.191.171.13 (391 hits)
- 185.191.171.4 (357 hits)
- 185.191.171.9 (341 hits)
**Why blocking it is safe for Google:** the real Googlebot in this same log uses the plain UA `Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)` with no `Chrome/99.0` tail, comes from Google's 66.249.66.x range, and got 200s on all 171 of its requests. The block matches only the impostor's modified string and 185.191.171.x addresses, which Google never crawls from, so genuine crawling is untouched.
Worth knowing: this is the same failure mode as our Fake-Crawler 404 Storm note, where the 404 storm itself (each 404 running full WordPress + a 8.6 KB error page) is what spiked the box. If you want, the block can go in as a 403 UA rule via the fleet's usual UA 403 path.
Qwen 3.8 Flash, raw (open)
2/5
130.3 s · 92,809 tokens in / 1,660 out · $0.0000 · 100% auto-checks
Read the answer
**Cause:** A fake-Googlebot scraper hammering the site with requests for nonexistent numbered URLs (`/product-N/`, `/shop-N/`, `/tag-N/`, `/old-N/`) — 1,089 of the log's 1,250 total 404s (45% of all requests in the window), each 404 serving expensive WordPress theme/DB work.
**User-Agent to block (exact string):**
```
Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0
```
**404 responses it caused:** **1089** (all 1,089 of its requests were 404s; 1,089 of the log's 1,250 total 404s)
**Source IPs:**
- 185.191.171.13 (391)
- 185.191.171.4 (357)
- 185.191.171.9 (341)
**Why this won't hurt real Google crawling:** Real Googlebot arrives only from Google's own 66.249.x.x ranges with the plain `Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)` UA and no trailing `Chrome/99.0` suffix — all 171 genuine Googlebot hits in this log are from 66.249.66.x with that exact plain string, so blocking the spoofed `...Chrome/99.0` variant (which only ever came from 185.191.171.x) touches zero real Google traffic.
Qwen 3.8 FP4 Local, raw (1 Spark)
2/5
103.5 s · 44,007 tokens in / 1,068 out · $0.0000 · 100% auto-checks
Read the answer
Found it. The spike is a fake-Googlebot scraper hammering nonexistent URLs.
**Cause:** A crawler spoofing Googlebot is generating ~45% of all traffic (1,089 of 2,400 requests), requesting thousands of unique nonexistent paths (`/product-XXXXX/`, `/shop-XXXXX/`, `/tag-XXXXX/`), each returning a 404 and eating server resources.
**Exact User-Agent to block:**
```
Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0
```
**404 responses it caused:** **1,089** (every single request from this UA returned 404)
**IPs it came from:**
- 185.191.171.13 (391 requests)
- 185.191.171.4 (357 requests)
- 185.191.171.9 (341 requests)
**Why blocking it won't hurt real Google crawling:** Real Googlebot in this same log comes from Google's genuine 66.249.66.0/24 range with the clean UA `Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html)` (no `Chrome/99.0` suffix) and requests real pages like `/contact/` and `/blog/` — so blocking this exact spoofed UA string and the 185.191.171.0/24 IPs leaves genuine Google crawling completely untouched. (Belt-and-suspenders: Google also publishes its crawler IP ranges, and real Googlebot IPs reverse-DNS to `googlebot.com`, so you can verify rather than blanket-block by UA alone.)
Ornith 1.5 35B (open)
2/5
97.2 s · 73,353 tokens in / 3,675 out · $0.0000 · 100% auto-checks
Read the answer
All 1089 requests from that UA were 404s, all from three IPs in the `185.191.171.0/24` range. Here's the answer.
---
**What caused the spike:** a fake Googlebot hammering `/product-*` and `/shop-*` URLs that don't exist on the site, generating 1089 404s.
**1. Exact User-Agent string to block:**
```
Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0
```
The ` Chrome/99.0` suffix is the tell — the real Googlebot never carries a Chrome version. The plain `.../bot.html)` UA is the legitimate one.
**2. Exact 404 count it caused:** **1,089** (every one of its 1,089 requests was a 404).
**3. Source IPs:** `185.191.171.4`, `185.191.171.9`, `185.191.171.13` (all in the `185.191.171.0/24` range).
**4. Why blocking it won't hurt real Google crawling:** the fake traffic originates from `185.191.171.0/24`, which is not in Google's search-crawler ranges (66.249.66.0/16, 68.18.0.0/15, 63.109.0.0/16), so real Googlebot traffic from those ranges is unaffected.
Qwen 3.8 Flash + my rules (open)
2/5
107.7 s · 109,094 tokens in / 1,261 out · $0.0000 · 100% auto-checks
Read the answer
**Cause of the spike:** a fake-crawler storm. One bot wearing a fake Googlebot label hammered nonexistent `/product-NNNNN/` and `/shop-NNNNN/` URLs, each trigger producing a heavy 404 page (about 8.6 KB of HTML per hit, likely a full WordPress 404 template with DB queries). That one bot made 1,089 of the log's 1,250 total 404s in the window.
**User-Agent to block (exact string):**
`Mozilla/5.0 (compatible; Googlebot/2.1; +http://www.google.com/bot.html) Chrome/99.0`
**404 responses it caused:** 1,089 (every one of its 1,089 requests was a 404)
**IPs it came from:**
- 185.191.171.13 (391)
- 185.191.171.4 (357)
- 185.191.171.9 (341)
**Why blocking it won't hurt real Google crawling:** real Googlebot only comes from Google's 66.249.64.0/18 range (this log's genuine Googlebot hits are all 66.249.66.x and are a different UA string, without the trailing `Chrome/99.0`, and they get 200s), while this impostor comes from a non-Google netblock (185.191.171.0/24) and appends a browser version real Googlebot never uses.
This matches the known "Fake-Crawler 404 Storm" pattern in fleet memory (404 storm = box load spike; blocking by UA with a 403 is the standard fix). The IP range 185.191.171.0/24 is a known abusive crawler range (Semrush-family scraping infrastructure), which reinforces the block.
Recursive Flint 40B (open)
0/5
900.0 s · 0% auto-checks
Read the answer
TIMEOUT after 900s
Triage a server incident from a journal excerpt
Pick: Opus 5.5
The prompt every model got
web01 shows csf.service as failed. Here is the journal:
Oct 08 18:10:02 web01 systemd[1]: Starting ConfigServer Firewall & Security - csf...
Oct 08 18:10:02 web01 csf[41211]: Restarting csf (FASTSTART)...
Oct 08 18:10:03 web01 systemd[1]: Starting ConfigServer Firewall & Security - csf...
Oct 08 18:10:03 web01 csf[41240]: Restarting csf (FASTSTART)...
Oct 08 18:10:04 web01 csf[41211]: Removing /var/lib/csf/csf.4.saved
Oct 08 18:10:04 web01 csf[41240]: *Error* File does not exist: [/var/lib/csf/csf.4.saved] at line 518
Oct 08 18:10:04 web01 systemd[1]: csf.service: Main process exited, code=exited, status=1/FAILURE
Oct 08 18:10:04 web01 systemd[1]: csf.service: Failed with result 'exit-code'.
`iptables -S INPUT | head -1` shows `-P INPUT DROP` and 171 rules are loaded.
In under 150 words: is the box exposed right now, what caused this, the exact commands to fix it, and how to avoid it next time.
Qwen 3.8 Flash + rules + thinking (open)
5/5
94.5 s · 14,139 tokens in / 2,189 out · $0.0000 · 100% auto-checks
Read the answer
The firewall is still blocking now: `INPUT` is `DROP`, and 171 rules are loaded. That is good. But the CSF service itself failed, so the firewall manager is not running normally, and the rules may not be maintained or survive a reload.
Cause: the log shows two CSF restarts overlapping. One deleted `/var/lib/csf/csf.4.saved`; the next one failed because that file was already gone.
Fix:
`systemctl reset-failed csf.service && systemctl start csf.service`
Then check:
`systemctl is-active csf.service`
`iptables -S INPUT | head -1`
Do not stop, disable, or flush the firewall.
Prevent: make CSF restarts use one lock, for example `flock /var/lock/csf-restart systemctl restart csf.service`, so they cannot overlap.
94.1 s · 14,291 tokens in / 651 out · $0.0000 · 100% auto-checks
Read the answer
The evidence shows the box is not exposed by IPv4 INPUT right now: policy is **DROP** and 171 rules are loaded. It does not prove IPv6, output, forwarding, or other chains.
Cause: two CSF restarts overlapped one second apart. One removed `/var/lib/csf/csf.4.saved` before the other could read it, causing exit code 1.
Fix:
```bash
systemctl reset-failed csf.service
systemctl start csf.service
systemctl is-active csf.service
```
Prevention: avoid parallel CSF restarts; use one serialized path only, e.g. `systemctl restart csf.service`, with lock/flock.
Haiku 5.5
4/5
11.9 s · 1,067 tokens in / 2,090 out · $0.0013 · 75% auto-checks
Read the answer
**Exposed?** Probably not. `-P INPUT DROP` is normal while csf is active, and 171 rules are loaded. Confirm the allow rules exist: `iptables -S INPUT | grep ACCEPT`. I can't check web01 directly, so verify that.
**Cause:** Two csf FASTSTART restarts ran at once (PIDs 41211 and 41240). The first deleted `/var/lib/csf/csf.4.saved`, and the second failed when it tried to remove the same file, exiting with status 1.
**Fix:**
```
ps -ef | grep '[c]sf' # look for stray instances
kill <stale PIDs> # only if duplicates remain
systemctl reset-failed csf.service
systemctl restart csf.service
systemctl status csf.service
iptables -S INPUT | head -1
```
Don't use `csf -x`, which sets INPUT to ACCEPT.
**Prevent:** Make sure only one trigger restarts csf (check cron, lfd, and config management). Don't run `csf -r` by hand while systemd is restarting it.
Opus 5.5
4/5
10.3 s · 1,066 tokens in / 828 out · $0.0251 · 100% auto-checks
Read the answer
**Exposed?** Probably not. INPUT policy is `DROP` and 171 rules are loaded, so the first run (PID 41211) most likely finished. Confirm with `csf -l` that your allow/deny chains look complete. A partial load fails closed, which risks lockout rather than exposure.
**Cause:** Two csf starts overlapped one second apart. Run 41211 removed `/var/lib/csf/csf.4.saved` (the FASTSTART snapshot) while run 41240 still needed it, so 41240 failed and systemd marked the unit failed.
**Fix:**
```
journalctl --since "2026-10-08 18:09" --until "18:11" # find the trigger
systemctl reset-failed csf
systemctl restart csf
systemctl status csf lfd
csf -l | head -40
```
**Prevent:**
- Trigger restarts from one place only: `systemctl restart csf`, not that plus `csf -r`, a cron job, or a config-management handler.
- Serialize automated restarts with `flock /run/csf-restart.lock systemctl restart csf`.
- If it recurs, set `FASTSTART = "0"` in `/etc/csf/csf.conf`.
Qwen 3.8 Flash + my rules (open)
4/5
17.0 s · 14,103 tokens in / 159 out · $0.0000 · 100% auto-checks
Read the answer
**Exposure:** The evidence shows the firewall is active right now, not exposed. `iptables -S` confirms `-P INPUT DROP` and 171 rules are loaded. The `failed` status means systemd thinks the last restart didn't finish cleanly, not that the rules vanished.
**Cause:** Two csf restarts fired a second apart. The first process removed `/var/lib/csf/csf.4.saved`. The second tried to read that same file, found it gone, and exited with code 1.
**Fix:**
```
systemctl reset-failed csf.service && systemctl start csf.service
systemctl is-active csf.service
```
**Prevention:** Find what triggers overlapping restarts, likely a cron or a hook.
Sonnet 5.5
2/5
11.6 s · 1,069 tokens in / 1,114 out · $0.0154 · 100% auto-checks
Read the answer
**Exposed?** Probably not. The policy is `DROP` and 171 rules are loaded, so the ruleset is mostly intact. The failed run may have aborted partway, though, so verify rather than assume.
**Cause:** Two `csf` restarts started one second apart (PIDs 41211 and 41240). They raced in FASTSTART, so one deleted `/var/lib/csf/csf.4.saved` and the other then failed on the missing file.
**Fix (run as root):**
```
pgrep -af 'csf|lfd'
systemctl stop lfd
csf -r
systemctl reset-failed csf.service
systemctl start lfd
systemctl is-active csf lfd
csf -l | head -20
```
**Prevent:**
- Find the double trigger: `grep -rE 'csf (-r|--restart)|systemctl (re)?start csf' /etc/cron* /etc/cron.d /root /usr/local/bin`. Likely sources are cron, a deploy or config-management script, or a panel hook.
- Keep a single restart path, and wrap any scripted restart in `flock -n /run/csf-restart.lock csf -r`.
- Update csf (`csf -u`).
Fable 5.1
2/5
14.0 s · 1,066 tokens in / 815 out · $0.0621 · 100% auto-checks
Read the answer
**Exposed?** No. The first instance (PID 41211) finished loading — policy DROP with 171 rules confirms the ruleset is live. systemd just thinks it failed because it tracked the second instance.
**Cause:** Two `csf` starts fired one second apart (41211 and 41240). FASTSTART writes/removes the temp file `/var/lib/csf/csf.4.saved`; the first run deleted it while the second was reading it. It's a race, not a config error — something (cron, a deploy script, `csf -r` by hand, or lfd) triggered a restart while systemd was already starting it.
**Fix:**
```
systemctl reset-failed csf
systemctl restart csf lfd
systemctl status csf lfd
csf -l | head
```
**Avoid:** Restart only via `systemctl restart csf lfd`; grep cron/scripts for stray `csf -r` or `csf -ra`; `journalctl -u csf --since "-1h"` to find what fired the second start. If it recurs, set `RESTRICT_SYSLOG`-independent `LF_DAEMON` checks aside and serialize restarts with `flock`.
Ornith 1.5 122B, raw (open)
2/5
70.8 s · 702 tokens in / 1,911 out · $0.0000 · 50% auto-checks
Read the answer
**Exposed? No.** `iptables -S INPUT | head -1` = `-P INPUT DROP` with 171 rules loaded means the firewall is live and dropping unmatched inbound traffic. The failed `csf.service` did *not* flush the ruleset — the box stays locked down.
**Cause:** During a FASTSTART restart, csf tried to clean up its backup and aborted (exit 1) at line 518 because `/var/lib/csf/csf.4.saved` was missing — a restart race, not an actual firewall fault. The service flaps, but the kernel ruleset is unaffected.
**Fix:**
```
mkdir -p /var/lib/csf
csf -r # regenerate + save rules cleanly
systemctl reset-failed csf
systemctl status csf
iptables -S INPUT | head -1 # confirm still -P INPUT DROP
```
**Avoid next time:** don't rapid-fire `csf -r`; persist `/var/lib/csf`; test with `csf -t` (loads without committing) and keep a second shell open before applying; the missing `.saved` is benign, so ensure rules load successfully before letting the service restart loop.
Ornith 1.5 122B + rules + thinking (open)
2/5
151.1 s · 6,291 tokens in / 3,198 out · $0.0000 · 75% auto-checks
Read the answer
**Not exposed.** The given `iptables -S INPUT` shows `-P INPUT DROP` with 171 rules loaded — the kernel firewall still enforces default-deny. The failed unit is the csf.service wrapper, not the rules themselves.
**Cause (from the log):** csf ran FASTSTART, then at line 518 tried to remove `/var/lib/csf/csf.4.saved`, which did not exist; that error made the unit exit `status=1/FAILURE`. The 171 rules were already loaded before the error.
**Fix:**
`systemctl reset-failed csf.service && systemctl start csf.service`
`systemctl is-active csf.service`
If it exits 1 again on the same line-518 error, the missing backup file keeps hard-failing the restart.
**Prevent:** make that backup-file removal tolerate a missing file, so an absent `.saved` can't fail the service.
Nanbeige 4.3 33B (open)
2/5
132.5 s · 735 tokens in / 2,094 out · $0.0000 · 25% auto-checks
Read the answer
**Exposed right now?** No — the 171 iptables rules with `INPUT DROP` are still active, so traffic is still filtered. But `csf.service` is dead: it can't apply new rules, and a reboot could leave the host unprotected.
**Cause:** On restart, csf's FASTSTART tried to read `/var/lib/csf/csf.4.saved` (its saved-state file) and it didn't exist — the file was deleted or a prior interrupted restart left a stale state. That "File does not exist" error at line 518 made csf exit with status 1.
**Fix:**
```
sudo touch /var/lib/csf/csf.4.saved
sudo systemctl restart csf
sudo systemctl status csf
```
If the file was deliberately removed, restore it from a known-good copy rather than an empty file.
**Avoid next time:** Never delete or move files in `/var/lib/csf/`; edit `csf.conf` and run `csf -r`; monitor for `csf.service` failures (systemd alerting or your monitoring); keep a backup of `csf.conf` and the state directory.
*(~140 words)*
Qwen 3.8 Flash, raw (open)
2/5
15.8 s · 703 tokens in / 211 out · $0.0000 · 75% auto-checks
Read the answer
**Exposed?** No. The failure is a race condition, not a firewall failure. Two `csf` processes started concurrently. Process A deleted `/var/lib/csf/csf.4.saved` while flushing rules, causing Process B to crash on exit. Your `iptables -S` output confirms `-P INPUT DROP` is active with 171 rules; the firewall is enforcing policy.
**Fix:**
1. Sync rules: `csf -r`
2. Reload systemd: `systemctl daemon-reload`
3. Restart: `systemctl restart csf`
**Prevent recurrence:**
The rapid restarts suggest systemd or a monitoring tool (e.g., `csf -a` or a cron job) triggered the double-start. Ensure your `/usr/lib/systemd/system/csf.service` contains `Restart=no` or `Restart=on-failure`. If a watchdog monitors `csf`, prevent it from issuing `csf -r` during systemd startup to stop the concurrency race.
Recursive Flint 40B (open)
1.5/5
94.2 s · 601 tokens in / 3,830 out · $0.0000 · 25% auto-checks
Read the answer
Right now, inbound exposure is likely blocked: `iptables -S INPUT | head -1` shows `-P INPUT DROP` and 171 rules loaded, so the default policy is DROP. But since csf failed, verify with `iptables -L -v -n` before trusting it.
Cause: csf failed during FASTSTART because `/var/lib/csf/csf.4.saved` was missing; it exited 1 at line 518.
Fix:
```bash
systemctl stop csf
mkdir -p /var/lib/csf
touch /var/lib/csf/csf.4.saved
systemctl start csf
```
Avoid: keep `/var/lib/csf` intact, monitor disk space, and ensure backup/state files persist across restarts.
Qwen 3.8 FP4 Local, raw (1 Spark)
1.5/5
40.5 s · 680 tokens in / 186 out · $0.0000 · 75% auto-checks
Read the answer
**Status:** Not exposed. The `-P INPUT DROP` policy and 171 rules mean iptables remains active in kernel space.
**Cause:** A race condition from rapid restarts (PID 41211 & 41240). PID 41211 deleted the saved rules file, causing PID 41240 to crash when it tried to read the missing `/var/lib/csf/csf.4.saved` file.
**Fix:**
```bash
rm -f /var/lib/csf/csf.4.saved
systemctl start csf
```
**Prevention:**
Avoid rapid restarts. If a restart fails, wait for the lock to clear or manually remove the stale saved files before retrying:
```bash
rm -f /var/lib/csf/csf.*.saved
systemctl restart csf
```
Ornith 1.5 35B (open)
1/5
10.5 s · 721 tokens in / 381 out · $0.0000 · 25% auto-checks
Read the answer
**Exposed? No.** The live ruleset is in place: `-P INPUT DROP` + 171 rules are already loaded in the kernel, so the box is locked down. The service "failure" is cosmetic.
**Cause:** csf's post-check (line 518) tries to remove a stale backup, `/var/lib/csf/csf.4.saved`, that no longer exists, so the script exits 1 and systemd marks the unit failed. The firewall itself is up.
**Fix:**
```
csf -u # re-read config, apply live ruleset
csf -f # flush + reload cleanly
rm -f /var/lib/csf/csf.4.saved # remove the stale backup
systemctl status csf # verify active
```
If the error persists, `csf -u` then `systemctl restart csf`.
**Avoid next time:**
- Check `csf -u` output before `systemctl restart csf`.
- Keep `/var/lib/csf/` clean; don't hand-edit `csf.c3` backups.
- Test with `csf -u` (applies without full flush) instead of `csf -f` when locked in.
- Add a fast-fail-safe: `csf -u` first, then `systemctl restart csf` only if needed.
Safety-check shell commands before running them
Pick: Haiku 5.5
The prompt every model got
Fleet rules: never run wp-cli as root with --allow-root; never write site files as root; never run `find` with -exec chmod/rm without `-type f` or `-type d`; never `git stash` or force-push in the shared repo; never `convert` an image onto its own path; cron wp-cli on web02 must use the pinned ea-php binary, not bare `wp`.
For each command, answer SAFE or UNSAFE with a 5-word reason. Reply as a numbered list only.
1. ssh root@web02 'wp --allow-root plugin update --all --path=/home/acme/public_html'
2. bbs wp acme -- plugin list --update=available
3. find /home/acme/public_html -exec chmod 644 {} \;
4. git pull --no-rebase && git push origin main
5. convert hero.png -strip hero.png
6. su - acme -c '/opt/cpanel/ea-php82/root/usr/bin/php /usr/local/bin/wp cache flush'
7. git stash && git pull
8. find /home/acme/public_html -type d -exec chmod 755 {} \;
9. */15 * * * * wp cron event run --due-now --path=/home/acme/public_html (web02 crontab)
10. git push --force origin main
Recursive Flint 40B (open)
5/5
66.1 s · 576 tokens in / 3,495 out · $0.0000 · 100% auto-checks
Read the answer
1. UNSAFE — Never run wp-cli as root
2. SAFE — This is safe read only
3. UNSAFE — Find missing type safety guard
4. SAFE — No force push used here
5. UNSAFE — Never overwrite source file directly
6. SAFE — Cache flush harmless safe operation
7. UNSAFE — Never use git stash here
8. SAFE — Directory type correctly used now
9. UNSAFE — Cron needs pinned binary now
10. UNSAFE — Never force push shared repo
Ornith 1.5 122B, raw (open)
5/5
57.5 s · 639 tokens in / 1,603 out · $0.0000 · 100% auto-checks
Read the answer
1. UNSAFE — Runs wp-cli as root user
2. SAFE — bbs runs as acme user
3. UNSAFE — Chmod lacks type filter flag
4. SAFE — Normal push, no force push
5. UNSAFE — Converts image onto its path
6. SAFE — Runs as acme, pinned php
7. UNSAFE — Stashes changes in shared repo
8. SAFE — Has type d guard flag
9. UNSAFE — Bare wp, not pinned binary
10. UNSAFE — Force push to shared repo
Nanbeige 4.3 33B (open)
5/5
174.6 s · 687 tokens in / 2,758 out · $0.0000 · 100% auto-checks
Read the answer
1. UNSAFE — Root wp-cli with allow-root forbidden
2. SAFE — Read-only plugin list without root
3. UNSAFE — Find exec chmod without types
4. SAFE — Normal pull push without force
5. UNSAFE — Image converted onto own path
6. SAFE — Runs as acme without root
7. UNSAFE — Git stash is explicitly forbidden
8. SAFE — Find exec type d permitted
9. UNSAFE — Bare wp, ea-php binary required
10. UNSAFE — Never force-push shared repository main
Haiku 5.5
4/5
7.1 s · 1,033 tokens in / 1,380 out · $0.0008 · 100% auto-checks
Read the answer
1. UNSAFE - Runs wp-cli as root with --allow-root.
2. SAFE - Read-only plugin listing, no root.
3. UNSAFE - find -exec chmod without -type.
4. SAFE - No forbidden stash or force-push.
5. UNSAFE - Overwrites source image onto itself.
6. SAFE - Non-root, pinned PHP, no --allow-root.
7. UNSAFE - Stash forbidden in shared repo.
8. SAFE - Directory-only find with -type d.
9. UNSAFE - Bare wp, not pinned ea-php.
10. UNSAFE - Force-push forbidden in shared repo.
Sonnet 5.5
4/5
3.9 s · 1,036 tokens in / 177 out · $0.0059 · 100% auto-checks
Read the answer
1. UNSAFE – root with --allow-root
2. SAFE – read-only plugin listing
3. UNSAFE – find -exec lacks -type
4. SAFE – ordinary pull and push
5. UNSAFE – converts onto its own path
6. SAFE – runs as acme, pinned php
7. UNSAFE – uses forbidden git stash
8. SAFE – has -type d restriction
9. UNSAFE – bare wp in cron
10. UNSAFE – forbidden force-push on shared repo
Opus 5.5
4/5
5.3 s · 1,032 tokens in / 336 out · $0.0150 · 100% auto-checks
Read the answer
1. UNSAFE – uses forbidden --allow-root as root.
2. SAFE – read-only list via site wrapper.
3. UNSAFE – chmod without -type f/d.
4. SAFE – merge pull, normal non-force push.
5. UNSAFE – convert writes onto own path.
6. SAFE – site user, pinned PHP binary.
7. UNSAFE – git stash forbidden in repo.
8. SAFE – find restricted with -type d.
9. UNSAFE – cron uses bare wp binary.
10. UNSAFE – force-push forbidden in repo.
Fable 5.1
4/5
7.3 s · 1,033 tokens in / 206 out · $0.0309 · 100% auto-checks
Read the answer
1. UNSAFE — root wp-cli with --allow-root flag.
2. SAFE — wrapper runs wp as acme.
3. UNSAFE — chmod exec lacks -type filter.
4. SAFE — normal pull, no force-push.
5. UNSAFE — converts image onto own path.
6. SAFE — pinned ea-php, runs as acme.
7. UNSAFE — git stash in shared repo.
8. SAFE — chmod exec restricted to directories.
9. UNSAFE — bare wp in web02 cron.
10. UNSAFE — force-push to shared repo.
59.6 s · 14,228 tokens in / 603 out · $0.0000 · 100% auto-checks
Read the answer
1. UNSAFE root wp-cli violates fleet rule
2. SAFE uses bbs wp as user
3. UNSAFE find lacks type before chmod
4. SAFE normal git workflow no stash
5. UNSAFE convert same path truncates image
6. SAFE runs wp as user acme
7. UNSAFE git stash violates shared rule
8. SAFE find targets directories safely
9. UNSAFE web02 cron needs pinned php
10. UNSAFE force push violates shared rule
Qwen 3.8 Flash, raw (open)
4/5
9.9 s · 635 tokens in / 111 out · $0.0000 · 100% auto-checks
Read the answer
1. UNSAFE: Never run wp-cli as root
2. SAFE: Read-only command, no writes
3. UNSAFE: Find chmod lacks type filter
4. SAFE: Normal pull and push workflow
5. UNSAFE: Convert overwrites its own input
6. SAFE: User is acme not root
7. UNSAFE: Never git stash shared repo
8. SAFE: Find chmod uses type d
9. UNSAFE: Cron must use pinned PHP
10. UNSAFE: Never force-push shared repo
Qwen 3.8 Flash + rules + thinking (open)
3.5/5
80.9 s · 14,075 tokens in / 2,102 out · $0.0000 · 100% auto-checks
Read the answer
1. UNSAFE never run wp-cli as root
2. SAFE fleet wp wrapper is safe
3. UNSAFE find command lacks type guard
4. SAFE no stash or force pushing
5. UNSAFE in place image overwrite truncates
6. SAFE user php cli is safe
7. UNSAFE never stash in shared repo
8. SAFE find targets only directories now
9. UNSAFE web02 cron uses bare wp
10. UNSAFE force pushing breaks shared repo
Ornith 1.5 122B + rules + thinking (open)
3.5/5
21.8 s · 6,226 tokens in / 496 out · $0.0000 · 100% auto-checks
Read the answer
1. UNSAFE — wp-cli runs as root, allow-root.
2. SAFE — runs as cPanel user, read-only.
3. UNSAFE — find lacks -type f guard.
4. SAFE — normal pull then push to main.
5. UNSAFE — convert writes onto its own path.
6. SAFE — runs as acme, pinned php binary.
7. UNSAFE — git stash forbidden in shared repo.
8. SAFE — find has -type d guard.
9. UNSAFE — bare wp on web02, needs ea-php.
10. UNSAFE — force-push forbidden in shared repo.
Ornith 1.5 35B (open)
3/5
16.0 s · 657 tokens in / 626 out · $0.0000 · 100% auto-checks
Read the answer
1. UNSAFE — wp-cli run as root with --allow-root.
2. SAFE — non-root acme, no --allow-root flag.
3. UNSAFE — find -exec chmod lacks -type f guard.
4. SAFE — plain pull and push, no force or stash.
5. UNSAFE — convert writes output onto its own input path.
6. SAFE — runs as acme using pinned ea-php binary.
7. UNSAFE — git stash used in the shared repo.
8. SAFE — find has -type d guard on chmod.
9. UNSAFE — bare wp in cron, not pinned ea-php.
10. UNSAFE — force-push forbidden in the shared repo.
Qwen 3.8 Flash + my rules (open)
3/5
7.1 s · 14,038 tokens in / 102 out · $0.0000 · 100% auto-checks
Read the answer
1. UNSAFE — running wp-cli as root
2. SAFE — proper bbs wp command
3. UNSAFE — find chmod missing type check
4. SAFE — no stash force push
5. UNSAFE — convert overwrites same path
6. SAFE — su user pinned php
7. UNSAFE — git stash forbidden rule
8. SAFE — find with type d flag
9. UNSAFE — bare wp not pinned binary
10. UNSAFE — force push forbidden
Qwen 3.8 FP4 Local, raw (1 Spark)
2/5
11.2 s · 618 tokens in / 102 out · $0.0000 · 0% auto-checks
Read the answer
1. UNSAFE runs wp-cli as root
2. SAFE read-only plugin list command
3. UNSAFE find -exec chmod lacks -type
4. SAFE standard pull and push workflow
5. UNSAFE overwrites image onto itself
6. UNSAFE not web02, wrong pinned binary
7. UNSAFE prohibited git stash command
8. SAFE find targets directories with -type
9. UNSAFE cron uses bare wp command
10. UNSAFE prohibited git force-push
Security review of a WordPress plugin snippet
Pick: Haiku 5.5
The prompt every model got
Review this WordPress admin handler. List every real security bug, worst first, each with the one-line fix. No style nits.
```php
add_action( 'admin_post_bbs_delete_lead', function () {
global $wpdb;
$id = $_GET['id'];
$wpdb->query( "DELETE FROM {$wpdb->prefix}leads WHERE id = $id" );
echo 'Deleted lead ' . $_GET['id'];
wp_redirect( admin_url( 'admin.php?page=leads' ) );
} );
```
Haiku 5.5
5/5
9.3 s · 801 tokens in / 1,612 out · $0.0010 · 100% auto-checks
Read the answer
1. **SQL injection.** `$id` goes straight into the query, so `id=0 OR 1=1` deletes every lead. Fix: `$id = absint( $_GET['id'] ?? 0 ); $wpdb->query( $wpdb->prepare( "DELETE FROM {$wpdb->prefix}leads WHERE id = %d", $id ) );`
2. **Missing authorization.** Any logged-in user, including subscribers, can trigger the delete. Fix: add `if ( ! current_user_can( 'manage_options' ) ) wp_die( 'Forbidden', 403 );` (or whatever capability governs leads).
3. **No nonce check (CSRF).** A state-changing action runs on a GET request with no nonce, so a logged-in admin can be tricked into deleting leads by visiting a malicious page. Fix: add `check_admin_referer( 'bbs_delete_lead_' . $id );` and generate the link with `wp_nonce_url()` using the same action name.
4. **Reflected XSS.** `$_GET['id']` is echoed unescaped. Fix: delete the `echo` line, or use `echo esc_html( absint( $_GET['id'] ?? 0 ) );`.
123.7 s · 14,046 tokens in / 732 out · $0.0000 · 100% auto-checks
Read the answer
1. **SQL injection**: `$id` goes straight from `$_GET` into the query.
**Fix**: `$id = isset($_GET['id']) ? absint($_GET['id']) : 0; $wpdb->query($wpdb->prepare("DELETE FROM {$wpdb->prefix}leads WHERE id = %d", $id));`
2. **No authorization check**: any logged-in user can trigger the deletion.
**Fix**: `if ( ! current_user_can('manage_options') ) { wp_die('Not allowed', 403); }`
3. **No CSRF nonce check**: another site or admin can trick a valid user into deleting leads.
**Fix**: `check_admin_referer('bbs_delete_lead_' . $id, '_wpnonce');` and include that nonce in the delete link.
4. **Unescaped output / XSS vector**: `$_GET['id']` is echoed directly.
**Fix**: use the sanitized `$id` integer, or `echo 'Deleted lead ' . esc_html( (string) $id );`
Recursive Flint 40B (open)
5/5
197.0 s · 411 tokens in / 9,994 out · $0.0000 · 100% auto-checks
Read the answer
Security bugs, worst first:
1. **SQL injection (critical):** `$id` is interpolated directly into the SQL query.
**One-line fix:** `$wpdb->query( $wpdb->prepare( "DELETE FROM {$wpdb->prefix}leads WHERE id = %d", absint( wp_unslash( $_GET['id'] ) ) ) );`
2. **Missing capability check (critical):** no `current_user_can()` before the admin action.
**One-line fix:** `if ( ! current_user_can( 'manage_options' ) ) { wp_die( 'Unauthorized' ); }`
3. **Missing CSRF nonce (high):** no nonce verification on the state-changing admin action.
**One-line fix:** `check_admin_referer( 'bbs_delete_lead' );`
4. **Unescaped output / XSS (medium):** raw `$_GET['id']` is echoed.
**One-line fix:** `echo 'Deleted lead ' . esc_html( absint( $_GET['id'] ) );`
Qwen 3.8 Flash + rules + thinking (open)
4/5
83.8 s · 13,892 tokens in / 2,181 out · $0.0000 · 100% auto-checks
Read the answer
1. **SQL injection** — `$id` is used raw in SQL.
Fix: `$id = absint($_GET['id']);`
2. **No permission check** — any logged-in user can run it.
Fix: `if (!current_user_can('manage_options')) wp_die();`
3. **No CSRF protection** — the delete action can be forced from an outside link.
Fix: `check_admin_referer('bbs_delete_lead_' . absint($_GET['id']));`
4. **Reflected XSS** — `echo` prints unsanitized `$_GET['id']`.
Fix: remove the `echo`, or use `esc_html($_GET['id'])`.
5. **No exit after redirect** — the response may continue despite the redirect.
Fix: `exit;`
Fable 5.1
4/5
10.9 s · 800 tokens in / 802 out · $0.0561 · 100% auto-checks
Read the answer
1. **SQL injection** — `$id` from `$_GET` is interpolated raw into the query. Anyone who can reach the handler can run arbitrary SQL (`id=1 OR 1=1` wipes the table).
Fix: `$wpdb->query( $wpdb->prepare( "DELETE FROM {$wpdb->prefix}leads WHERE id = %d", $id ) );`
2. **No capability check** — `admin_post_*` fires for any logged-in user (including Subscribers). Any account can delete leads.
Fix: `if ( ! current_user_can( 'manage_options' ) ) wp_die( 'Unauthorized', 403 );` (or a custom `manage_leads` cap).
3. **No nonce / CSRF protection** — a GET link with no nonce means an attacker can trick an admin into deleting leads via a crafted link or image tag.
Fix: `check_admin_referer( 'bbs_delete_lead_' . $id );` and generate the link with `wp_nonce_url()`.
4. **Reflected XSS** — `$_GET['id']` is echoed unescaped. Even though a redirect follows, the body is still sent (and output before headers may break the redirect, leaving the XSS payload rendered).
Fix: remove the `echo` entirely (or `esc_html()` it if output is genuinely needed).
5. **Missing `exit` after `wp_redirect()`** — execution continues past the redirect, so any code after it (and any hooked output) still runs.
Fix: `wp_safe_redirect( admin_url( 'admin.php?page=leads' ) ); exit;`
Corrected handler:
```php
add_action( 'admin_post_bbs_delete_lead', function () {
global $wpdb;
$id = isset( $_GET['id'] ) ? absint( $_GET['id'] ) : 0;
if ( ! current_user_can( 'manage_options' ) ) {
wp_die( 'Unauthorized', 403 );
}
check_admin_referer( 'bbs_delete_lead_' . $id );
$wpdb->query( $wpdb->prepare( "DELETE FROM {$wpdb->prefix}leads WHERE id = %d", $id ) );
wp_safe_redirect( admin_url( 'admin.php?page=leads' ) );
exit;
} );
```
Ornith 1.5 122B, raw (open)
4/5
111.6 s · 457 tokens in / 2,176 out · $0.0000 · 100% auto-checks
Read the answer
## Security review — `admin_post_bbs_delete_lead`
**1. SQL injection (critical)**
`$id = $_GET['id']` is interpolated raw into the query string, so any value in `?id=` becomes executable SQL. This is the worst issue — it allows arbitrary query injection, data exfiltration, and potentially RCE.
Fix:
```php
$wpdb->query( $wpdb->prepare( "DELETE FROM {$wpdb->prefix}leads WHERE id = %d", $_GET['id'] ) );
```
**2. No CSRF / nonce verification (high)**
The action performs a destructive write with no `check_admin_referer()`. A victim logged in as any user can be tricked by a malicious page/link into deleting leads (CSRF).
Fix:
```php
check_admin_referer( 'delete_lead_' . $_GET['id'] );
```
(and build the link with `wp_nonce_url( ... , 'delete_lead_' . $id )`.)
**3. No capability/authorization check (high)**
There is no `current_user_can()` gate, so *any* authenticated user — including low-privilege roles — can delete any lead (broken access control / IDOR).
Fix:
```php
if ( ! current_user_can( 'delete_leads' ) ) wp_die( 'Insufficient permissions' );
```
**4. Reflected XSS via raw input echo (low)**
`echo 'Deleted lead ' . $_GET['id']` reflects unsanitized request input into the response.
Fix:
```php
echo 'Deleted lead ' . esc_html( $_GET['id'] );
```
---
Notes I deliberately did **not** flag as bugs (checked, not exploitable here): `wp_redirect` vs `wp_safe_redirect` — the target is a fixed `admin_url()`, so there's no open redirect. The missing `exit;` after `wp_redirect()` is a real correctness bug (execution continues) but not a security one.
Sonnet 5.5
2/5
7.9 s · 806 tokens in / 885 out · $0.0121 · 100% auto-checks
Read the answer
1. **SQL injection** (`$_GET['id']` concatenated into the query). Fix: `$wpdb->delete( $wpdb->prefix . 'leads', [ 'id' => absint( $_GET['id'] ?? 0 ) ], [ '%d' ] );` (or `$wpdb->prepare( "... WHERE id = %d", $id )`).
2. **No capability check** (any logged-in user, including subscribers, can delete leads). Fix: `if ( ! current_user_can( 'manage_options' ) ) wp_die( 'Forbidden', 403 );` (use whatever capability fits your leads role).
3. **No CSRF protection** (a crafted link or image tag can trigger deletion while an admin is logged in). Fix: add a nonce to the link with `wp_nonce_url( ..., 'bbs_delete_lead_' . $id )` and verify with `check_admin_referer( 'bbs_delete_lead_' . $id )` at the top of the handler.
4. **Reflected XSS** (`echo 'Deleted lead ' . $_GET['id']` outputs raw input). Fix: delete the echo (it's never seen anyway because of the redirect), or use `esc_html( $id )` if you keep it.
5. **State change via GET** (amplifies #3, since links, prefetchers, and crawlers can trigger it). Fix: use a POST form with a nonce field, and read from `$_POST`.
6. **Missing `exit` after `wp_redirect`** (the script keeps running after the redirect header is sent, and the echo output corrupts the redirect with "headers already sent" issues). Fix: add `exit;` immediately after `wp_redirect(...)`, and use `wp_safe_redirect` for internal URLs.
Also, `admin_post_bbs_delete_lead` only fires for logged-in users, so unauthenticated access is already blocked. The real gaps are the missing authorization and nonce checks above.
Consolidated version:
```php
add_action( 'admin_post_bbs_delete_lead', function () {
if ( ! current_user_can( 'manage_options' ) ) {
wp_die( 'Forbidden', 403 );
}
$id = absint( $_POST['id'] ?? 0 );
check_admin_referer( 'bbs_delete_lead_' . $id );
global $wpdb;
$wpdb->delete( $wpdb->prefix . 'leads', [ 'id' => $id ], [ '%d' ] );
wp_safe_redirect( admin_url( 'admin.php?page=leads' ) );
exit;
} );
```
Opus 5.5
2/5
14.9 s · 802 tokens in / 1,413 out · $0.0347 · 100% auto-checks
Read the answer
Four security bugs, worst first. One non-security bug follows.
**1. SQL injection (critical).** `$id` goes straight from `$_GET` into the query, unquoted. `?id=1 OR 1=1` wipes the table. Time-based blind payloads can also read any data in the database, including `wp_users` password hashes.
Fix: `$wpdb->delete( "{$wpdb->prefix}leads", [ 'id' => absint( $_GET['id'] ?? 0 ) ], [ '%d' ] );`
**2. No capability check (high).** `admin_post_*` fires for **any logged-in user**, including subscribers. Combined with #1, a subscriber can run arbitrary SQL.
Fix: `if ( ! current_user_can( 'manage_options' ) ) wp_die( 'Forbidden', 403 );`
**3. No nonce, so CSRF (high).** An admin who loads `<img src="…/admin-post.php?action=bbs_delete_lead&id=…">` on any site deletes leads. Because of #1, the attacker can also inject SQL using the admin's session.
Fix: `check_admin_referer( 'bbs_delete_lead_' . $id );`, and build the delete link with `wp_nonce_url( $url, 'bbs_delete_lead_' . $id )`.
**4. Reflected XSS (medium).** `$_GET['id']` is echoed raw, so `?id=<script>…` runs in the admin's session. #2 and #3 don't stop this alone, because the payload executes before any check would matter in a crafted link.
Fix: delete the `echo` line. If you must output it, use `esc_html( $id )`.
**Non-security bug:** the `echo` sends output before `wp_redirect()`, so the redirect fails with "headers already sent." There's also no `exit` after the redirect.
Fix: drop the `echo` and use `wp_safe_redirect( admin_url( 'admin.php?page=leads' ) ); exit;`
Corrected version:
```php
add_action( 'admin_post_bbs_delete_lead', function () {
if ( ! current_user_can( 'manage_options' ) ) {
wp_die( 'Forbidden', 403 );
}
$id = absint( $_GET['id'] ?? 0 );
check_admin_referer( 'bbs_delete_lead_' . $id );
global $wpdb;
$wpdb->delete( "{$wpdb->prefix}leads", [ 'id' => $id ], [ '%d' ] );
wp_safe_redirect( admin_url( 'admin.php?page=leads&deleted=1' ) );
exit;
} );
```
Ornith 1.5 122B + rules + thinking (open)
2/5
49.8 s · 6,044 tokens in / 1,171 out · $0.0000 · 75% auto-checks
Read the answer
**1. SQL injection (worst).** `$id = $_GET['id']` is dropped straight into the query string with no escaping: `"DELETE FROM {$wpdb->prefix}leads WHERE id = $id"`. An attacker can pass `id=0 OR 1=1` (or a subquery) and delete/steal arbitrary data.
Fix: `$wpdb->query( $wpdb->prepare( "DELETE FROM {$wpdb->prefix}leads WHERE id = %d", $_GET['id'] ) );`
**2. No CSRF / nonce check.** The handler never verifies a nonce, so any site can fire this action by making an authenticated admin load a crafted page.
Fix: add `check_admin_referer( 'delete_lead', 'lead_nonce' )` at the top, and put a nonce in the delete link.
**3. No authorization check.** `admin_post_{action}` hooks run for logged-out requests too, and there is no `current_user_can()` gate, so an unauthenticated caller can delete leads directly.
Fix: add `if ( ! current_user_can( 'delete_leads' ) ) wp_die( 'Unauthorized' );` before the delete.
Claims I checked and rejected as not real bugs: the `wp_redirect` target is a fixed URL (not an open redirect); the `echo` is a style/UX nit, not a security issue.
Nanbeige 4.3 33B (open)
2/5
351.7 s · 485 tokens in / 5,381 out · $0.0000 · 100% auto-checks
Read the answer
**1. SQL injection — arbitrary SQL execution (worst)**
`$_GET['id']` is interpolated raw into the query. `id=1 OR 1=1` wipes every lead; `id=1; DROP TABLE…` or a subselect can take the DB down.
Fix: `$id = (int) $_GET['id'];` before the query (or `$wpdb->prepare( "DELETE … WHERE id = %d", $id )`).
**2. No authorization check**
Nothing verifies the current user is allowed to delete leads — anyone who can trigger the action gets destructive power over the leads table.
Fix: `if ( ! current_user_can( 'manage_leads' ) ) { return; }` (use the capability that actually governs lead deletion, e.g. `delete_posts` for a post type).
**3. No CSRF nonce — the action is a plain GET**
Because the handler reads `$_GET`, a single crafted link (`admin-post.php?action=bbs_delete_lead&id=123`) performs the deletion whenever an admin visits it — no POST required, no nonce.
Fix: `if ( ! wp_verify_nonce( sanitize_text_field( $_GET['_wpnonce'] ?? '' ), 'bbs_delete_lead' ) ) { return; }` — and issue that nonce in the delete link that admins click.
**4. Reflected, unescaped input in the response (XSS half of the CSRF chain)**
`echo 'Deleted lead ' . $_GET['id']` renders attacker-controlled HTML in the admin's browser when the forged link is opened.
Fix: `echo 'Deleted lead ' . esc_html( $_GET['id'] );`
Not a security issue, but heads-up: the `echo` before `wp_redirect()` will break the redirect (output already sent) — move the message after the redirect or use a template redirect.
The core problem is that the endpoint trusts raw input and any requestor: cast/prepare the ID, gate on capability, and require a nonce — then all four are closed.
Qwen 3.8 Flash, raw (open)
2/5
9.5 s · 453 tokens in / 126 out · $0.0000 · 75% auto-checks
Read the answer
- **Missing permission/capability check**: Any logged-in user (or unauthenticated via CSRF if nonce absent) can delete leads. → Add `current_user_can( 'manage_options' )` (or appropriate capability) check before processing.
- **No nonce verification**: Handler is vulnerable to CSRF attacks. → Verify nonce with `check_admin_referer()` before performing the deletion.
- **SQL Injection**: Unsanitized `$_GET['id']` is directly interpolated into the SQL query. → Sanitize/validate the input using `absint()` and use prepared statements (`$wpdb->prepare()`).
Qwen 3.8 FP4 Local, raw (1 Spark)
2/5
29.0 s · 434 tokens in / 209 out · $0.0000 · 100% auto-checks
Read the answer
- **Missing capability/permission check (CSRF + privilege escalation):** anyone can delete leads by hitting the URL.
*Fix:* `if ( ! current_user_can( 'manage_options' ) ) wp_die( 'Forbidden' );`
- **SQL injection:** `$_GET['id']` is interpolated directly into the query.
*Fix:* Use `$wpdb->prepare( "DELETE FROM {$wpdb->prefix}leads WHERE id = %d", absint( $_GET['id'] ) )` or cast to `(int)`.
- **Reflected XSS:** `$_GET['id']` is echoed back without escaping.
*Fix:* `echo 'Deleted lead ' . esc_html( $id );`
- **Broken redirect (headers sent):** `echo` before `wp_redirect()` sends output, so the redirect fails.
*Fix:* Remove the `echo` or add `exit;` only after redirect (better: remove output entirely before `wp_redirect`).
Ornith 1.5 35B (open)
2/5
29.3 s · 470 tokens in / 1,206 out · $0.0000 · 100% auto-checks
Read the answer
`admin_post_*` handlers are public endpoints (no auth by default), so this is wide open. Bugs, worst first:
1. **Unauthenticated action (no capability check).** `admin_post_bbs_delete_lead` runs for anyone, including logged-out users, at `wp-admin/admin-post.php?action=bbs_delete_lead`. Anonymous users can delete any lead.
Fix: `if (! current_user_can('manage_options')) { wp_die('Denied'); }` as the first line.
2. **SQL injection.** `$id` is interpolated straight into the query string, so `$_GET['id']` is attacker-controlled (`id=1 OR 1=1`, UNION, etc.).
Fix: `$wpdb->query($wpdb->prepare("DELETE FROM {$wpdb->prefix}leads WHERE id = %d", (int) $id));` (or use `$wpdb->delete()`).
3. **No nonce / CSRF.** Nothing proves the request originated from your own admin UI, so a forged link triggers the delete.
Fix: `check_admin_referer('bbs_delete_lead');` before the query.
4. **IDOR / broken access control.** The handler deletes *any* lead by id with no ownership check, so a user can delete another customer's leads.
Fix: scope the delete to the current user's records (or require an admin capability) and verify the row exists before deleting.
5. **Reflected XSS.** `echo 'Deleted lead ' . $_GET['id'];` dumps attacker input into the admin page.
Fix: `echo 'Deleted lead ' . esc_html( (int) $_GET['id'] );` (or don't echo it at all).
6. **`wp_redirect` without `exit`.** The function returns but execution continues, so the redirect header is sent and then more output runs.
Fix: `wp_redirect( admin_url('admin.php?page=leads') ); exit;`.
Qwen 3.8 Flash + my rules (open)
2/5
15.4 s · 13,854 tokens in / 262 out · $0.0000 · 75% auto-checks
Read the answer
This handler has four security bugs. Here they are, worst first.
**1. No permission check.** Anyone logged in, even a subscriber, can hit the URL and delete a lead. The fix: check `current_user_can('manage_options')` first, or whatever capability actually owns this action.
**2. No CSRF nonce check.** A logged-in admin who clicks a planted link on any website gets the delete fired. The fix: `check_admin_referer('bbs_delete_lead')` and build the URL with `wp_nonce_url()` at the link.
**3. SQL injection.** `$id` goes raw into the query string. A crafted `id` reads data or drops more than one row. The fix: use `$wpdb->prepare('... WHERE id = %d', absint($id))`.
**4. Output before redirect, no `exit`.** The `echo` sends output first, which breaks the redirect headers, and there is no `exit` after `wp_redirect()` so the code keeps running. The fix: drop the `echo` and add `exit;` after `wp_redirect()`.
The first three matter most: no permission check and no nonce together mean any visitor or any logged-in user can wipe leads.
Todoist closeout comment in 7th-grade language
Pick: nobody passed reliably
The prompt every model got
Write the Todoist comment for this finished task. Rules: plain 7th-grade words, outcome first, explain any jargon, no em dashes, under 120 words, do NOT say the task is closed (Blake closes tasks himself).
Task: 'Update plugins on acmeplumbing.com'
Facts: MainWP said success for 7 plugins. Re-read with wp-cli: 6 updated, Gravity Forms stayed at 2.9.4 (license expired). Backup: /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB). bbs verify http https://acmeplumbing.com PASS 200. Contact form test submission arrived in Postmark log.
Qwen 3.8 Flash + rules + thinking (open)
5/5
66.3 s · 13,933 tokens in / 1,686 out · $0.0000 · 100% auto-checks
Read the answer
6 of 7 plugins updated on acmeplumbing.com. MainWP said all 7 passed, but wp-cli, a tool that reads real versions, found Gravity Forms still on 2.9.4 because its license expired. It needs a valid license before that plugin can update. The site check passed with 200, which means the page loaded okay. A contact form test message arrived in Postmark, the mail service log. Backup: /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB).
Recursive Flint 40B (open)
5/5
38.7 s · 444 tokens in / 1,999 out · $0.0000 · 100% auto-checks
Read the answer
Updated 6 plugins on acmeplumbing.com. MainWP, a WordPress plugin manager, said 7 were done, but the wp-cli tool, which manages WordPress from the command line, showed 6 really updated. Gravity Forms, a form plugin, did not update because its license expired. Backup made at /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB). Site check passed with a normal response. Contact form test went through and showed up in the email service log.
Ornith 1.5 122B + rules + thinking (open)
5/5
19.5 s · 6,079 tokens in / 377 out · $0.0000 · 100% auto-checks
Read the answer
6 of 7 plugins updated on acmeplumbing.com.
MainWP first said all 7 were done, but I re-checked each one with wp-cli (a tool that reads the live site). Six updated cleanly. Gravity Forms stayed at version 2.9.4 because its license has expired, so it could not update. That plugin still works, it just needs a renewed license to get newer versions.
How I checked:
- The site loads fine. A live check returned a 200 status, which means "all good."
- A test message sent through the contact form showed up in the Postmark log (Postmark is the mail service that delivers form messages).
Backup saved at /home/acme/backups/acme-2026-10-10.tar.gz.
Qwen 3.8 Flash + my rules (open)
5/5
6.7 s · 13,894 tokens in / 98 out · $0.0000 · 100% auto-checks
Read the answer
6 of 7 plugins updated. Gravity Forms stayed at 2.9.4 because its license expired, so it keeps running but won't get new fixes.
Check results: site responds with a 200 code (working page), and the contact form test arrived in Postmark, our email service.
Backup if anything breaks: /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB).
53.9 s · 14,082 tokens in / 483 out · $0.0000 · 100% auto-checks
Read the answer
6 of 7 plugins updated. Gravity Forms stayed at 2.9.4 because its license expired. MainWP said success for 7, but a wp-cli check found 6. Backup: /home/acme/backups/acme-2026-10-10.tar.gz, 1.2 GB. Site check passed with code 200, meaning the page loaded. Contact form test arrived in Postmark, the mail service log.
Haiku 5.5
2/5
5.1 s · 851 tokens in / 737 out · $0.0005 · 100% auto-checks
Read the answer
Six of seven plugins on acmeplumbing.com are now on their newest versions. Gravity Forms (the contact form plugin) did not update because its license has expired. Renewing the license and updating it again will finish this.
What I checked:
- I confirmed the versions directly on the site. MainWP, our dashboard tool, reported all seven as updated, which was wrong for Gravity Forms.
- Before making changes, I saved a full backup of the site at /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB) in case we need to restore it.
- The site health check passed. The home page loads normally (HTTP 200).
- A test message sent through the contact form arrived. Postmark, our email service, logged it.
Sonnet 5.5
2/5
4.2 s · 852 tokens in / 220 out · $0.0056 · 100% auto-checks
Read the answer
6 of 7 plugins updated on acmeplumbing.com. Gravity Forms did not update and is still on version 2.9.4, because its license expired.
MainWP (the tool that updates plugins for us) reported all 7 as a success. I checked again with wp-cli (a command line tool for WordPress) and found the real result was 6.
The site is working. A web check returned 200, which means the page loaded fine. A test message from the contact form showed up in the Postmark log (our email service).
Backup before the updates: /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB).
Next step: renew the Gravity Forms license, then update it.
Opus 5.5
2/5
7.2 s · 849 tokens in / 578 out · $0.0183 · 100% auto-checks
Read the answer
6 of 7 plugins are updated. Gravity Forms did not update. It is still on version 2.9.4 because its license (the paid key that allows updates) has expired. Renewing the license will let it update.
Note: MainWP (our update dashboard) said all 7 worked. I double-checked with wp-cli (a tool that reads the site directly) and found Gravity Forms had not changed.
Checks:
- Backup made first: /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB)
- Site loads normally. https://acmeplumbing.com returned code 200, which means OK.
- Contact form works. A test message showed up in Postmark, our email sending service.
Fable 5.1
2/5
5.6 s · 848 tokens in / 239 out · $0.0289 · 100% auto-checks
Read the answer
6 of 7 plugins on acmeplumbing.com are updated. Gravity Forms did not update. It is still on version 2.9.4 because its license has expired. A license is the paid key that lets a plugin download new versions. You will need to renew it before that plugin can update.
MainWP (the tool that updates many sites at once) reported all 7 as done, so I checked each plugin by hand on the server. That is how I caught the Gravity Forms miss.
Checks after the update:
- Site loads fine (status 200, which means OK).
- Contact form test message arrived in Postmark, the email service.
- Full backup saved before the work: /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB).
Ornith 1.5 122B, raw (open)
2/5
11.4 s · 493 tokens in / 255 out · $0.0000 · 100% auto-checks
Read the answer
Six of seven plugins on acmeplumbing.com were updated. MainWP first reported all seven done, but I checked again with a command-line tool (wp-cli, a way to run WordPress fixes from the terminal) and found only six changed. Gravity Forms stayed on version 2.9.4 because its license has expired, so it needs a renewed license before it can update.
A full backup was saved first at /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB) in case anything went wrong.
The site is live: a health check returned a normal 200 status. The contact form also works, since a test message showed up in the Postmark email log.
Nanbeige 4.3 33B (open)
2/5
29.9 s · 520 tokens in / 438 out · $0.0000 · 100% auto-checks
Read the answer
Plugins updated on acmeplumbing.com and the site checks out. MainWP, the plugin manager, reported success for 7 plugins. I re-checked with wp-cli, a command-line tool for WordPress: 6 plugins updated. Gravity Forms did not update because its license expired, so it stays at version 2.9.4.
A backup was made first: /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB).
The site verification passed: bbs verify (a tool that checks a website over both http and https) returned PASS with status 200, meaning the site loads correctly. A test contact form submission went through and arrived in the Postmark log, the email delivery record, so the form works end to end.
One follow-up: renew the Gravity Forms license to get the 7th plugin updated.
Qwen 3.8 Flash, raw (open)
2/5
10.1 s · 493 tokens in / 139 out · $0.0000 · 100% auto-checks
Read the answer
The update mostly worked. 6 of 7 plugins are updated. Gravity Forms stayed on its old version 2.9.4 because its license ran out. A full site backup sits at /home/acme/backups/acme-2026-10-10.tar.gz. It is 1.2 GB.
We double-checked the updates with wp-cli. This is a tool that checks the site from the server, more reliable than the dashboard report.
Site checks passed. The http test and the https check both gave 200 status, which means pages load fine. The contact form worked. A test message reached the email service log.
Qwen 3.8 FP4 Local, raw (1 Spark)
2/5
26.5 s · 473 tokens in / 166 out · $0.0000 · 80% auto-checks
Read the answer
I updated the plugins on acmeplumbing.com. Seven plugins were marked as done by our central manager. But when I checked again with a command-line tool called wp-cli, six had truly updated. Gravity Forms did not change because its license has expired. So the site is not fully updated and someone needs to renew that license.
I made a backup file before starting. It is stored at /home/acme/backups/acme-2026-10-10.tar.gz and is 1.2 GB. "tar.gz" means a compressed backup archive.
I verified the site loads correctly over a secure HTTPS connection. I also sent a test message through the contact form. It arrived in Postmark, the service that handles outgoing email. Everything works except the expired Gravity Forms plugin.
Ornith 1.5 35B (open)
2/5
6.6 s · 511 tokens in / 218 out · $0.0000 · 100% auto-checks
Read the answer
Plugins on acmeplumbing.com are updated. Six of seven plugins are on their newest versions, and the site is healthy.
One small note: Gravity Forms stayed at version 2.9.4 because its license has expired, so it could not update.
Details:
- Backup saved to /home/acme/backups/acme-2026-10-10.tar.gz (1.2 GB).
- Site health check passed with a 200 status.
- Contact form test submission arrived in the Postmark log.
Client email as Blake about a delay and the estimate
Pick: Haiku 5.5
The prompt every model got
Write the email as Blake Howe (casual, direct, owns mistakes, no corporate phrases, no em dashes) to Dana at Sefton Steel. Facts: the staging rebuild estimate was 20 hours; we're at 26 hours; the 6 extra came from the old theme's hard-coded slider that had to be rebuilt; Blake will bill 22 (eats 4 because he should have flagged it at hour 18); launch moves from Oct 14 to Oct 17; Dana needs to approve the new homepage on staging (sefton.clientstaging.io) by Oct 15. Under 160 words.
Haiku 5.5
5/5
3.1 s · 820 tokens in / 256 out · $0.0003 · 100% auto-checks
Read the answer
Subject: Sefton staging rebuild, timeline and billing
Hi Dana,
Quick update on the staging rebuild. The estimate was 20 hours and we're at 26. The extra 6 came from the old theme's hard-coded slider, which had to be rebuilt from scratch. I should have flagged that at hour 18 instead of waiting, and that's on me.
So I'm billing 22 hours. I'm eating the other 4.
Because of the slip, launch moves from October 14 to October 17.
What I need from you: please review the new homepage on staging at sefton.clientstaging.io and approve it by October 15 so we hold the October 17 date.
If anything on the homepage looks off, reply with notes and I'll turn them around fast.
Thanks,
Blake
Sonnet 5.5
5/5
4.2 s · 823 tokens in / 283 out · $0.0061 · 100% auto-checks
Read the answer
**Subject:** Sefton staging update: hours and new launch date
Hi Dana,
Quick heads up on the staging rebuild. I estimated 20 hours and we're at 26.
The extra 6 came from the old theme's hard-coded slider. It was baked into the theme files, so I had to rebuild it from scratch. I should have flagged that at hour 18 when it became clear, and I didn't. That's on me.
So you're not paying for my miss, I'm billing 22 hours instead of 26 and eating the other 4.
The slider work pushes launch from Oct 14 to Oct 17.
What I need from you: please review and approve the new homepage on staging by Oct 15 so we can hit the 17th. It's at sefton.clientstaging.io.
If anything looks off, tell me and I'll turn it around fast.
Thanks,
Blake
Opus 5.5
5/5
4.7 s · 818 tokens in / 286 out · $0.0123 · 100% auto-checks
Read the answer
Subject: Staging rebuild update: hours and new launch date
Hi Dana,
Quick update on the staging rebuild. I estimated 20 hours and we're now at 26. The extra 6 came from the old theme's slider, which was hard-coded and had to be rebuilt from scratch.
That's on me. I should have flagged it around hour 18 when it became clear, not after the fact. So I'm only billing 22 hours and eating the other 4.
The slider work also pushes launch from Oct 14 to Oct 17.
To keep us on track for the 17th, I need you to review and approve the new homepage on staging by Oct 15:
sefton.clientstaging.io
If anything looks off or you want changes, just reply here and I'll jump on it.
Thanks for your patience on this one.
Blake
Fable 5.1
5/5
5.3 s · 818 tokens in / 266 out · $0.0296 · 100% auto-checks
Read the answer
Subject: Staging rebuild update and new launch date
Hi Dana,
Quick update on the staging rebuild. I estimated 20 hours and we're at 26. The extra 6 came from the old theme's slider, which was hard-coded into the template and had to be rebuilt from scratch to work with the new setup.
I'll bill 22. I should have flagged this at hour 18 when it was obvious we'd go over, and I didn't, so the other 4 are on me.
Because of the extra work, launch moves from Oct 14 to Oct 17.
One thing I need from you: please review and approve the new homepage on staging by Oct 15 so we can hit the 17th.
https://sefton.clientstaging.io
If anything looks off, send me a list and I'll get to it right away.
Thanks,
Blake
Recursive Flint 40B (open)
5/5
31.8 s · 422 tokens in / 1,621 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Staging rebuild and new homepage
Hey Dana,
Quick update on the Sefton staging rebuild.
We estimated 20 hours. We're at 26. The extra 6 came from the old theme's hard-coded slider, which had to be rebuilt. My bad for not flagging it at hour 18.
I'll bill 22. I'm eating the extra 4.
Launch moved from Oct 14 to Oct 17.
You need to approve the new homepage on staging at sefton.clientstaging.io by Oct 15.
Let me know if that deadline works.
Thanks,
Blake Howe
Ornith 1.5 122B, raw (open)
5/5
9.5 s · 472 tokens in / 207 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Staging rebuild update
Hi Dana,
Quick update on the staging rebuild. My original estimate was 20 hours, and we're at 26 now. The extra six came from the old theme's slider, which was hard-coded and had to be rebuilt from scratch.
I'm billing 22 hours, not 26. I should have flagged this to you back at hour 18 instead of pushing through, so I'm eating the other four.
Because of the extra work, launch moves from Oct 14 to Oct 17.
To keep us on that date, I need your sign-off on the new homepage on staging by Oct 15. You can review it here: sefton.clientstaging.io
Let me know if you have questions.
Thanks,
Blake
Ornith 1.5 122B + rules + thinking (open)
5/5
17.9 s · 6,061 tokens in / 347 out · $0.0000 · 100% auto-checks
Read the answer
Hi Dana,
Quick update on the Sefton staging rebuild.
The estimate was 20 hours. We landed at 26. The extra 6 came from the old theme's slider, which was hard-coded and had to be rebuilt from scratch.
Here's where I'll land the bill: 22 hours. I should have flagged the slider at hour 18 instead of pushing through, so I'm eating the other 4 hours.
Launch date moves from Oct 14 to Oct 17.
One thing I need from you: please approve the new homepage on staging by Oct 15, so we hold the new launch date. It's live at sefton.clientstaging.io.
Let me know if anything on the page needs fixing.
Blake
Nanbeige 4.3 33B (open)
5/5
52.1 s · 493 tokens in / 797 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Staging rebuild update and new launch date
Dana,
Quick update on the staging rebuild. The estimate was 20 hours, and we're at 26. The extra six came from the old theme's hard-coded slider that had to be rebuilt from scratch.
I'll bill 22 hours, which eats four because I should have flagged the slider issue at hour 18 instead of waiting. My mistake, and I'll absorb the cost difference.
Launch moves from Oct 14 to Oct 17.
I need one thing from you: please approve the new homepage on staging (sefton.clientstaging.io) by Oct 15. That approval is what lets me keep the new date.
I'll keep you posted as we get closer to launch.
Blake
Qwen 3.8 Flash, raw (open)
5/5
11.5 s · 473 tokens in / 169 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Staging rebuild update - new launch date Oct 17
Hey Dana,
Quick update on the staging rebuild.
We're at 26 hours against the 20-hour estimate. The extra 6 came from the old theme's hard-coded slider, which had to be rebuilt from scratch. That's on me. I should have flagged it at hour 18 instead of letting it run, so I'm eating 4 of those hours. You'll be billed 22 total.
With that, launch moves from Oct 14 to Oct 17.
One thing I need from you: approve the new homepage on staging at sefton.clientstaging.io by Oct 15 so we stay on track.
Let me know if you have questions.
Thanks,
Blake
Qwen 3.8 Flash + my rules (open)
5/5
9.2 s · 13,873 tokens in / 148 out · $0.0000 · 100% auto-checks
Read the answer
Hi Dana,
Staging rebuild hit 26 hours against my 20 estimate. The old theme had a hard-coded slider I couldn't reuse, so it needed a full rebuild. That's on me for not flagging it earlier, but I should have caught it sooner.
I'm billing 22 hours. I'll eat the extra 4 since I should have raised the flag around hour 18.
Launch moves from Oct 14 to Oct 17. The new homepage is ready for your review on staging at sefton.clientstaging.io. Please approve it by Oct 15 so we can stay on track for the new date.
Let me know if that works.
Qwen 3.8 Flash + rules + thinking (open)
4/5
17.7 s · 13,910 tokens in / 426 out · $0.0000 · 100% auto-checks
Read the answer
Hey Dana,
Quick update on the staging rebuild. The estimate was 20 hours. We're at 26. The old theme had a hard-coded slider that couldn't be ported, so I rebuilt it from scratch. That's the 6-hour gap.
Here's the thing: I should have flagged that at hour 18 instead of powering through. So I'm eating 4 of those extra hours. I'll bill you for 22.
Launch shifts from Oct 14 to Oct 17. To hit that, I need your eyes on the new homepage at sefton.clientstaging.io by Oct 15. Even a quick "looks good" or a list of tweaks keeps things moving.
Sorry for the slip. Let me know if that works.
Blake
Qwen 3.8 FP4 Local, raw (1 Spark)
4/5
21.4 s · 454 tokens in / 204 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Staging rebuild update - 26 hours, new launch date Oct 17
Hey Dana,
Quick update on the staging rebuild. The estimate was 20 hours, we're at 26. The extra 6 came from the old theme's hard-coded slider, which had to be rebuilt from scratch. That's on me. I should have flagged it around hour 18 instead of letting it run.
Because of that, I'm billing 22 hours. I'll eat the other 4.
Launch moves from Oct 14 to Oct 17.
Two things I need from you:
- Approve the new homepage on staging at sefton.clientstaging.io by Oct 15.
That's the big one. Once you sign off, we're clear to hit Oct 17.
Let me know if the slider thing or the billing makes sense, or if you want to hop on a call.
Blake
Ornith 1.5 35B (open)
4/5
8.9 s · 493 tokens in / 321 out · $0.0000 · 67% auto-checks
Read the answer
Hey Dana,
Quick heads up on the staging rebuild. We were at 20 hours, now we're at 26. The extra six came from the old theme's hard-coded slider, which had to be rebuilt from scratch.
I'm going to bill 22, not 26, and eat the four myself. That was on me to flag at hour 18, and I should have.
Because of that, I'm moving launch from the 14th to the 17th.
Can you approve the new homepage on staging (sefton.clientstaging.io) by the 15th? That gives me two days to finish up before the new launch date.
Let me know if you have any questions.
Thanks,
Blake
47.5 s · 14,064 tokens in / 397 out · $0.0000 · 100% auto-checks
Read the answer
Hey Dana,
Quick update on the staging rebuild. We're at 26 hours against the 20-hour estimate. The extra 6 came from the old theme's slider being hard-coded into the template, so I had to rebuild it from scratch rather than just swap it out.
That's on me. I should have caught it around hour 18 and flagged it then instead of letting it run. I'm billing 22 hours, eating the 4-hour difference past my own flag point.
One thing shifted: launch moves from Oct 14 to Oct 17. No big deal, just a nudge on timing.
For that to hold, I need you to review and approve the new homepage on staging (sefton.clientstaging.io) by Oct 15. Let me know if anything needs a tweak.
Site-doc note from raw work facts
Pick: Haiku 5.5
The prompt every model got
Write the dated site-doc entry (markdown, starts with `### 2026-10-10 — ` then a short title) for server/sites/web02/acme.md. Sections: **What.**, **Proof.**, **Rollback.** Keep it tight. Facts: raised PHP memory_limit 256M -> 512M in MultiPHP INI for acme (ea-php82) because Elementor editor white-screened with 'Allowed memory size of 268435456 bytes exhausted'. Before: `php -i` via bbs wp showed 256M. After: 512M, editor loads for post 42, bbs verify http PASS 200. Old ini saved at /home/acme/.php-ini-backup-2026-10-10. No cache purge needed.
Sonnet 5.5
5/5
3.7 s · 860 tokens in / 300 out · $0.0064 · 100% auto-checks
Read the answer
```markdown
### 2026-10-10 — Raised PHP memory_limit to 512M for Elementor
**What.** Raised PHP `memory_limit` from 256M to 512M in MultiPHP INI for acme (ea-php82). Elementor editor was white-screening with `Allowed memory size of 268435456 bytes exhausted`. No cache purge needed.
**Proof.**
- Before: `php -i` via `bbs wp` showed `memory_limit` 256M.
- After: `php -i` shows 512M.
- Elementor editor loads for post 42.
- `bbs verify http` PASS (200).
**Rollback.** Restore the old ini from `/home/acme/.php-ini-backup-2026-10-10` (or set `memory_limit` back to 256M in MultiPHP INI for ea-php82), then re-check with `php -i` via `bbs wp`.
```
Opus 5.5
5/5
6.0 s · 858 tokens in / 488 out · $0.0166 · 100% auto-checks
Read the answer
```markdown
### 2026-10-10 — acme: PHP memory_limit 256M → 512M (Elementor white-screen)
**What.** Raised `memory_limit` from 256M to 512M in MultiPHP INI Editor for acme (ea-php82). The Elementor editor was white-screening with `Allowed memory size of 268435456 bytes exhausted`.
**Proof.**
- Before: `php -i` via `bbs wp` showed `memory_limit => 256M`.
- After: `php -i` showed `memory_limit => 512M`.
- Elementor editor loads for post 42.
- `bbs verify http` PASS (200).
- No cache purge needed.
**Rollback.** Restore the old ini from `/home/acme/.php-ini-backup-2026-10-10`, or set `memory_limit` back to 256M in MultiPHP INI (ea-php82). Re-check with `php -i` via `bbs wp`, then run `bbs verify http`.
```
Qwen 3.8 Flash + rules + thinking (open)
5/5
21.1 s · 13,965 tokens in / 516 out · $0.0000 · 100% auto-checks
Read the answer
### 2026-10-10 — Raised PHP memory limit
**What.**
Raised PHP `memory_limit` from 256M to 512M in MultiPHP INI for `acme` (`ea-php82`) because the Elementor editor white-screened with `Allowed memory size of 268435456 bytes exhausted`.
**Proof.**
Before: `php -i` via `bbs wp` showed 256M.
After: `php -i` showed 512M.
Elementor editor loaded for post 42.
`bbs verify http` returned PASS 200.
No cache purge needed.
**Rollback.**
Restore the old ini from `/home/acme/.php-ini-backup-2026-10-10`.
Fable 5.1
5/5
9.7 s · 857 tokens in / 430 out · $0.0386 · 100% auto-checks
Read the answer
```markdown
### 2026-10-10 — PHP memory_limit 256M → 512M (Elementor white screen)
**What.** Elementor editor white-screened with `Allowed memory size of 268435456 bytes exhausted`. Raised `memory_limit` 256M → 512M in MultiPHP INI for acme (ea-php82). Old ini backed up to `/home/acme/.php-ini-backup-2026-10-10`. No cache purge needed.
**Proof.** Before: `php -i` via `bbs wp` showed 256M. After: 512M; Elementor editor loads for post 42; `bbs verify http` PASS 200.
**Rollback.** Restore `/home/acme/.php-ini-backup-2026-10-10` to the MultiPHP INI location for acme (or set `memory_limit` back to 256M in MultiPHP INI Editor), then re-run `bbs verify http`.
```
52.9 s · 14,116 tokens in / 498 out · $0.0000 · 100% auto-checks
Read the answer
### 2026-10-10 — Raised PHP memory limit for Elementor editor
**What.** Raised PHP memory_limit from 256M to 512M in MultiPHP INI for acme (ea-php82) because the Elementor editor white-screened with "Allowed memory size of 268435456 bytes exhausted".
**Proof.** Before: `php -i` via `bbs wp` showed 256M. After: 512M. Editor loads for post 42. `bbs verify http` PASS 200. No cache purge needed.
**Rollback.** Restore the old ini from `/home/acme/.php-ini-backup-2026-10-10`.
Recursive Flint 40B (open)
5/5
27.0 s · 459 tokens in / 1,379 out · $0.0000 · 100% auto-checks
Read the answer
### 2026-10-10 — acme PHP memory_limit raised
**What.**
Raised PHP memory_limit from 256M to 512M in MultiPHP INI for acme (`ea-php82`) because Elementor editor white-screened with “Allowed memory size of 268435456 bytes exhausted”.
**Proof.**
Before: `php -i` via bbs wp showed 256M. After: 512M; Elementor editor loads for post 42; bbs verify http PASS 200.
**Rollback.**
Restore old ini from `/home/acme/.php-ini-backup-2026-10-10`. No cache purge needed.
Qwen 3.8 Flash, raw (open)
5/5
14.4 s · 526 tokens in / 215 out · $0.0000 · 100% auto-checks
Read the answer
### 2026-10-10 — Raised acme PHP memory_limit to 512M to fix Elementor editor OOM
**What.**
Raised `memory_limit` from 256M to 512M in MultiPHP INI Editor for `acme` (ea-php82). Elementor editor was white-screening with `Allowed memory size of 268435456 bytes exhausted`. No cache purge required.
**Proof.**
Before: `php -i` via `bbs wp` showed 256M. After: 512M. Elementor editor now loads for post 42; `bbs verify http` returns PASS 200.
**Rollback.**
Restore old ini from `/home/acme/.php-ini-backup-2026-10-10`, reapply in MultiPHP INI Editor, then confirm `php -i` reports 256M.
Qwen 3.8 FP4 Local, raw (1 Spark)
5/5
18.9 s · 507 tokens in / 198 out · $0.0000 · 100% auto-checks
Read the answer
### 2026-10-10 — Raised PHP memory_limit to 512M for acme
**What.** Raised PHP memory_limit from 256M to 512M in MultiPHP INI Editor (ea-php82) for acme to resolve Elementor editor white-screening with "Allowed memory size of 268435456 bytes exhausted".
**Proof.** Before: `php -i` via bbs wp showed 256M. After: 512M confirmed; Elementor editor loads for post 42; bbs verify http PASS 200. No cache purge needed.
**Rollback.** Restore old ini from `/home/acme/.php-ini-backup-2026-10-10` or set memory_limit back to 256M in MultiPHP INI (ea-php82).
Qwen 3.8 Flash + my rules (open)
5/5
13.8 s · 13,927 tokens in / 207 out · $0.0000 · 100% auto-checks
Read the answer
### 2026-10-10 — PHP memory limit raised 256M to 512M for Elementor editor
**What.** Raised `memory_limit` from 256M to 512M for acme (ea-php82) in MultiPHP INI Editor. The Elementor editor white-screened with "Allowed memory size of 268435456 bytes exhausted". No cache purge was needed.
**Proof.** Before: `php -i` via `bbs wp` showed 256M. After: 512M. Editor loads for post 42. `bbs verify acme http` returned PASS (200).
**Rollback.** Restore the saved ini at `/home/acme/.php-ini-backup-2026-10-10` via MultiPHP INI Editor, then verify with `bbs verify acme http`.
Haiku 5.5
4/5
5.9 s · 860 tokens in / 866 out · $0.0006 · 100% auto-checks
Read the answer
```markdown
### 2026-10-10 — Raise PHP memory_limit to 512M for acme
**What.** Raised `memory_limit` from 256M to 512M in the MultiPHP INI settings for acme (ea-php82). The Elementor editor was white-screening with `Allowed memory size of 268435456 bytes exhausted`. No cache purge needed.
**Proof.**
- Before: `php -i` run via `bbs wp` showed `memory_limit => 256M`.
- After: `memory_limit` shows 512M. The Elementor editor loads for post 42.
- `bbs verify http` PASS (200).
**Rollback.** Restore the previous INI from `/home/acme/.php-ini-backup-2026-10-10` and reapply it in MultiPHP INI Editor for acme (ea-php82). Confirm `memory_limit` returns to 256M with `php -i` via `bbs wp`.
```
I haven't written this to `server/sites/web02/acme.md`, since I can't access that path from here. Paste the block into the file, or tell me to write it if file access is available.
Ornith 1.5 122B, raw (open)
4/5
203.7 s · 12,241 tokens in / 4,383 out · $0.0000 · 100% auto-checks
Read the answer
The sandbox's tool layer isn't responding in this run — every call (`write`, `shell`, `read`, `ls`) returned `No such tool available`, so I couldn't persist the file. Here's the exact content to drop into `server/sites/web02/acme.md`:
```markdown
### 2026-10-10 — Raised PHP memory_limit for Elementor editor
**What.** Bumped `memory_limit` 256M → 512M in MultiPHP INI for acme (ea-php82). Elementor editor was white-screening with `Allowed memory size of 268435456 bytes exhausted`. Old ini saved at `/home/acme/.php-ini-backup-2026-10-10`. No cache purge needed.
**Proof.** Before: `php -i` via bbs wp showed 256M. After: 512M; Elementor editor loads for post 42; `bbs verify http` PASS 200.
**Rollback.** Restore `/home/acme/.php-ini-backup-2026-10-10` to the MultiPHP INI setting (memory_limit back to 256M).
```
If the file tools come back online, tell me and I'll write it straight to `server/sites/web02/acme.md`.
Ornith 1.5 122B + rules + thinking (open)
4/5
83.3 s · 6,115 tokens in / 2,005 out · $0.0000 · 100% auto-checks
Read the answer
### 2026-10-10 — Raised PHP memory_limit to 512M for Elementor
**What.** Raised PHP memory_limit from 256M to 512M in MultiPHP INI for acme (ea-php82); the Elementor editor had white-screened with 'Allowed memory size of 268435456 bytes exhausted'.
**Proof.** Before, `php -i` via bbs wp showed 256M. After, 512M; the Elementor editor loads for post 42; bbs verify http PASS 200. Old ini saved at /home/acme/.php-ini-backup-2026-10-10.
**Rollback.** Restore the old ini from /home/acme/.php-ini-backup-2026-10-10.
Nanbeige 4.3 33B (open)
4/5
108.8 s · 6,273 tokens in / 1,572 out · $0.0000 · 100% auto-checks
Read the answer
I don't have file-writing tools available in this session (no `bash`/`write` tool access), so I can't create the file directly. Here's the entry — paste it into `server/sites/web02/acme.md`:
```markdown
### 2026-10-10 — PHP memory_limit 256M → 512M for acme (ea-php82)
**What.** Elementor editor white-screened with "Allowed memory size of 268435456 bytes exhausted". Raised PHP `memory_limit` 256M → 512M in the MultiPHP INI for acme (ea-php82). No cache purge needed.
**Proof.** `php -i` via `bbs wp` showed 256M before, 512M after. Elementor editor now loads for post 42; `bbs verify http` PASS 200.
**Rollback.** Restore the old INI from `/home/acme/.php-ini-backup-2026-10-10`.
```
Notes on choices made:
- Title leads with the change and affected PHP version, matching the `### YYYY-MM-DD — short title` format you specified.
- Kept to exactly the three requested sections; all facts from your list are included, nothing added.
- If the file already has prior entries, append this below them (markdown headings are additive).
Ornith 1.5 35B (open)
1/5
4.2 s · 544 tokens in / 114 out · $0.0000 · 0% auto-checks
Read the answer
I'll write the entry to the file. Let me check if it exists first, then append the entry.
Commit message from a diff
Pick: Haiku 5.5
The prompt every model got
Write the git commit message for this diff (subject under 72 chars, blank line, short body on why). Reply with only the message.
```diff
--- a/ai-config/bbs/preflight-rules.json
+++ b/ai-config/bbs/preflight-rules.json
@@ -41,6 +41,13 @@
+ {
+ "id": "csf-double-restart",
+ "match": "csf (-ra|-r|--restartall)",
+ "when_running": "pgrep -f 'csf --initup|csf -ra'",
+ "level": "deny",
+ "why": "2026-10-08 web01: two overlapping csf restarts raced on csf.4.saved and left csf.service failed"
+ },
```
Haiku 5.5
5/5
2.6 s · 854 tokens in / 112 out · $0.0002 · 100% auto-checks
Read the answer
Add csf double-restart preflight deny rule
A second csf restart issued while one is already running let the two
runs race on csf.4.saved, leaving csf.service failed on web01 on
2026-10-08. Add a deny rule that blocks csf -ra/-r/--restartall when
a csf --initup or csf -ra process is already running.
Opus 5.5
5/5
3.7 s · 852 tokens in / 109 out · $0.0090 · 100% auto-checks
Read the answer
Add preflight rule to deny overlapping csf restarts
On 2026-10-08, web01 ran two csf restarts at the same time. They raced
on csf.4.saved and left csf.service in a failed state. The new rule
denies a csf -r/-ra/--restartall command while another csf restart or
--initup process is still running.
Qwen 3.8 Flash + rules + thinking (open)
5/5
18.2 s · 13,964 tokens in / 429 out · $0.0000 · 100% auto-checks
Read the answer
preflight: deny double csf restarts that broke csf on web01
On 2026-10-08 two overlapping csf restarts raced on csf.4.saved and left csf.service failed on web01. This rule blocks csf -ra and --restartall while another csf restart is already running.
Fable 5.1
5/5
3.3 s · 853 tokens in / 122 out · $0.0231 · 100% auto-checks
Read the answer
Add preflight rule denying csf restart while one is in progress
On 2026-10-08 web01 had two overlapping csf restarts race on
csf.4.saved, leaving csf.service in a failed state. Deny any
`csf -r/-ra/--restartall` when a `csf --initup` or `csf -ra`
process is already running so the agent can't repeat this.
32.3 s · 14,116 tokens in / 239 out · $0.0000 · 100% auto-checks
Read the answer
Add csf double-restart preflight rule
Prevent overlapping csf restarts. On 2026-10-08 web01, two restarts raced
on csf.4.saved and left csf.service failed.
Qwen 3.8 FP4 Local, raw (1 Spark)
5/5
9.0 s · 505 tokens in / 68 out · $0.0000 · 100% auto-checks
Read the answer
Block overlapping csf restarts in preflight rules
Two concurrent csf restarts on web01 raced on csf.4.saved and left
csf.service failed (2026-10-08). Add a deny rule that blocks a csf
restart when another restart/initup is already running.
Sonnet 5.5
4.5/5
3.6 s · 857 tokens in / 125 out · $0.0047 · 100% auto-checks
Read the answer
Add preflight rule to deny overlapping csf restarts
Two csf restarts running at the same time raced on csf.4.saved on web01 (2026-10-08) and left csf.service in a failed state.
The new csf-double-restart rule denies csf -r, -ra, and --restartall when a csf restart or --initup process is already running, so the second restart can't corrupt the first.
Recursive Flint 40B (open)
4/5
54.2 s · 466 tokens in / 436 out · $0.0000 · 100% auto-checks
Read the answer
Add deny rule for csf double restart
Block overlapping csf restarts that raced and left csf.service failed.
Qwen 3.8 Flash + my rules (open)
3.5/5
5.8 s · 13,925 tokens in / 73 out · $0.0000 · 100% auto-checks
Read the answer
Add preflight rule to block overlapping csf restarts
csf -ra run while another csf restart is in flight raced on
csf.4.saved on web01 (2026-10-08) and left csf.service failed.
Deny the command when a prior csf restart/init is still running.
Ornith 1.5 122B, raw (open)
2/5
6.0 s · 525 tokens in / 68 out · $0.0000 · 100% auto-checks
Read the answer
Add csf-double-restart preflight rule
Prevents overlapping csf restarts from racing on csf.service.saved, which caused a failed service on web01.
Ornith 1.5 122B + rules + thinking (open)
2/5
13.2 s · 6,113 tokens in / 274 out · $0.0000 · 100% auto-checks
Read the answer
Add preflight rule blocking overlapping csf restarts
A new deny rule catches a second `csf -ra/--restart` while one is already
running. On 2026-10-08 web01 two overlapping csf restarts raced on
csf.4.saved and left csf.service failed.
Qwen 3.8 Flash, raw (open)
2/5
5.3 s · 522 tokens in / 48 out · $0.0000 · 100% auto-checks
Read the answer
Add preflight rule to block concurrent csf restarts
A race between two csf restarts corrupted csf.4.saved on web01 and left csf.service failed; deny the command when another restart is already running.
Ornith 1.5 35B (open)
1/5
2.8 s · 1,107 tokens in / 29 out · $0.0000 · 0% auto-checks
Read the answer
(empty answer)
Nanbeige 4.3 33B (open)
0/5
900.0 s · 0% auto-checks
Read the answer
TIMEOUT after 900s
Cold email to a local business (no invented facts)
Pick: Haiku 5.5
The prompt every model got
Write a cold email from Blake (Building Better Software, WordPress care plans) to the owner of Riverbend Dental. The only facts you know: their site is WordPress, their homepage took 7.8 seconds to load on mobile in a Lighthouse test today, and their copyright footer says 2021. Under 110 words, one clear ask, no invented numbers, stats, names, or claims about their business. No em dashes.
Haiku 5.5
5/5
7.8 s · 753 tokens in / 1,355 out · $0.0008 · 100% auto-checks
Read the answer
**Subject:** Riverbend Dental homepage load time on mobile
Hi there,
I ran a Lighthouse test on the Riverbend Dental homepage today, and it took 7.8 seconds to load on mobile. Patients searching from their phones may notice that delay before they see anything else.
Your site runs on WordPress, and the footer still reads 2021, so it may be worth checking whether updates are current.
I'm Blake Howe with Building Better Software. We offer WordPress care plans.
Would you be open to a short call this week so I can walk you through the test results?
Blake Howe
Building Better Software
Qwen 3.8 Flash + rules + thinking (open)
5/5
37.5 s · 13,864 tokens in / 943 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Site speed and copyright year
Hi Riverbend Dental,
I noticed your site runs on WordPress. In today’s mobile Lighthouse test, the homepage took 7.8 seconds to load. The copyright footer also says 2021.
I run Building Better Software, which offers WordPress care plans.
Would you like me to send a short list of fixes for those two items?
Thanks,
Blake
Recursive Flint 40B (open)
5/5
38.4 s · 391 tokens in / 1,636 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Riverbend Dental WordPress site
Hi,
I run Building Better Software and handle WordPress care plans.
I noticed your site is WordPress and your homepage took 7.8 seconds to load on mobile in a Lighthouse test today. I also saw the copyright footer says 2021.
I am not writing to guess at your business. I wanted to share what we noticed and see if you would be open to a quick call to discuss your WordPress site performance.
Would you be open to a short call next week?
Thanks,
Blake
Building Better Software
Nanbeige 4.3 33B (open)
4.5/5
42.5 s · 446 tokens in / 658 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Quick question about your site speed
Hi Riverbend Dental team,
I was looking at your website today and ran a Lighthouse test on your homepage. It runs on WordPress, which is great, but the page took 7.8 seconds to load on mobile. I also noticed your copyright footer still reads 2021, which may be worth updating.
At Building Better Software, we offer WordPress care plans that help sites load faster and stay maintained. Would you be open to a short call this week to see if we can help?
Best,
Blake
Building Better Software
Word count: ~80. One ask (a short call), no invented figures, no em dashes.
Ornith 1.5 122B + rules + thinking (open)
3.5/5
46.5 s · 6,019 tokens in / 1,179 out · $0.0000 · 100% auto-checks
Read the answer
Hi Riverbend Dental,
I'm Blake with Building Better Software. I ran a free mobile speed test on your WordPress site today. Your homepage took 7.8 seconds to load on mobile.
I help dental offices keep their sites fast and current. The copyright year in your footer still reads 2021, so it may be worth a fresh look.
Could I send you a short note with a few quick fixes? No cost, no pressure.
Best,
Blake Howe
Building Better Software
Opus 5.5
3/5
8.9 s · 752 tokens in / 710 out · $0.0202 · 80% auto-checks
Read the answer
**Subject:** Riverbend Dental homepage on mobile
Hi,
I ran your homepage through a Lighthouse test today, and on mobile it took 7.8 seconds to load. I also noticed your footer copyright still says 2021, which can be a sign a WordPress site hasn't had regular attention in a while.
I'm Blake with Building Better Software. Our WordPress care plans keep sites updated, backed up, and running fast, so you don't have to think about it.
Would you be open to a 15-minute call next week? I'll walk you through what the test flagged and what I'd fix first.
Thanks,
Blake Howe
Building Better Software
---
The body is about 95 words. The care plan description (updates, backups, speed) is a generic placeholder, so adjust it to match what your plans actually include.
Sonnet 5.5
2/5
3.9 s · 755 tokens in / 229 out · $0.0053 · 80% auto-checks
Read the answer
**Subject:** Riverbend Dental's homepage on mobile
Hi,
I ran a Lighthouse test on the Riverbend Dental homepage today, and it took 7.8 seconds to load on mobile. That's long enough that many visitors on a phone may give up before seeing anything.
I also noticed the footer still says 2021, which can make a site look neglected even when the practice is very much active.
I run WordPress care plans at Building Better Software, covering updates, speed fixes, and routine upkeep.
Would you be open to a 15-minute call this week so I can share the full test results?
Best,
Blake Howe
Building Better Software
---
Word count: about 100. No em dashes.
Fable 5.1
2/5
10.1 s · 751 tokens in / 289 out · $0.0295 · 100% auto-checks
Read the answer
**Subject:** Your homepage load time on mobile
Hi there,
I run Building Better Software, a small shop that handles WordPress care plans for local businesses.
I ran a Lighthouse test on the Riverbend Dental homepage today. On mobile it took 7.8 seconds to load. I also noticed the copyright footer still reads 2021, which often means a site has not had regular updates for a while.
Both are fixable and usually not expensive to address.
Would you be open to a 15 minute call next week? I will walk you through what I found and what it would take to resolve it, no obligation.
Best,
Blake Howe
Building Better Software
73.9 s · 14,018 tokens in / 588 out · $0.0000 · 100% auto-checks
Read the answer
Hi,
I build WordPress sites and care plans. Your Riverbend Dental homepage took 7.8 seconds to load on mobile in a Lighthouse test today. Your copyright footer says 2021.
That can make the site feel old to visitors.
Would you like me to reply with a short, no-pressure review of what may be slowing the page?
Thanks,
Blake
Building Better Software
Ornith 1.5 122B, raw (open)
2/5
10.4 s · 431 tokens in / 231 out · $0.0000 · 80% auto-checks
Read the answer
Subject: Quick note on your website
Hi,
I'm Blake with Building Better Software. I looked at Riverbend Dental's WordPress site today and wanted to flag two things that may be costing you patients.
Your homepage took 7.8 seconds to load on mobile in a Lighthouse test I ran today. Slow mobile load times quietly push visitors to click away before they ever reach your booking page.
Your footer also still shows a 2021 copyright year, which can make a practice look out of date.
I run WordPress care plans that keep sites fast, current, and well maintained, so you don't have to worry about any of it.
Could I send you a short, no-cost report with what I found and how I'd fix it?
Best,
Blake
Building Better Software
Qwen 3.8 Flash, raw (open)
2/5
9.8 s · 428 tokens in / 117 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Quick thought about your website
Hi [Name],
I noticed your website is running WordPress, but it took 7.8 seconds to load on mobile in a Lighthouse test today. Also, the copyright year in your footer still says 2021.
Slow load times often hurt local search rankings and lose patients before they even call. Small maintenance steps usually fix these issues quickly.
I run Building Better Software, a WordPress care plans company. Can I send over a brief, free checklist showing exactly what to update first?
Thanks,
Blake
Qwen 3.8 FP4 Local, raw (1 Spark)
2/5
21.7 s · 412 tokens in / 128 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Your site's mobile load time
Hi there,
I ran a quick Lighthouse test on your homepage today and noticed it took 7.8 seconds to load on mobile. That kind of delay usually pushes visitors away before they can book an appointment.
I also noticed your footer copyright still says 2021. Small updates like that help maintain trust and show patients you are active.
I run WordPress care plans at Building Better Software that handle performance fixes and maintenance automatically.
Would you be open to a short call this week so I can show you how to fix these issues?
Best,
Blake
Ornith 1.5 35B (open)
2/5
6.1 s · 446 tokens in / 200 out · $0.0000 · 100% auto-checks
Read the answer
Subject: Your dental site loads in 8 seconds on mobile
Quick question about your dental practice. You build a great patient experience in the office, but your website takes 7.8 seconds to load on mobile, which is about four times slower than it should be.
I've spent 20 years building software, and when a patient can't reach you quickly, they leave.
Would you be open to a quick conversation about how a WordPress care plan could get your site loading faster?
Would you be available for a 15 minute call this week?
Best,
Blake Howe
Building Better Software
Qwen 3.8 Flash + my rules (open)
2/5
7.8 s · 13,830 tokens in / 119 out · $0.0000 · 100% auto-checks
Read the answer
Hey Riverbend team,
I ran a quick check on your site today and the mobile homepage took 7.8 seconds to load. Most visitors won't wait that long, and Google uses speed when it ranks you, so a slow site can cost you real appointments.
I run Building Better Software. We take care of WordPress sites like yours, with care plans that cover speed, security, and updates, so you don't have to think about it.
Would it help if I sent you a few specific fixes for that load time? Free, no strings.
Blake
Decide which lessons are worth saving to memory
Pick: Sonnet 5.5
The prompt every model got
Memory rule: more memories is an anti-goal. Save a memory only if you can name a concrete future session that will act differently because of it, and it is not already recorded in the repo (code, site docs, git history). For each candidate answer SAVE or SKIP with one sentence why.
A. 'Ran wp plugin update on acme today; 6 of 7 updated.' (already in the acme site doc)
B. 'On web02, cron jobs that call bare `wp` get the CGI SAPI and fail silently; pin ea-php82.' (not written anywhere yet)
C. 'Blake prefers short Todoist comments.' (already in AGENTS.md)
D. 'The Instantly API returns HTTP 200 with an empty list when the key is expired, so a refill can report success while doing nothing.' (not written anywhere yet)
E. 'Lighthouse scores vary run to run.' (general knowledge)
Haiku 5.5
5/5
4.8 s · 917 tokens in / 469 out · $0.0004 · 100% auto-checks
Read the answer
**A. SKIP.** The acme site doc already records this, so the repo is the source of truth.
**B. SAVE.** It isn't recorded anywhere, and a future session debugging silent cron failures on web02 would otherwise have to rediscover the CGI SAPI problem.
**C. SKIP.** AGENTS.md already covers this preference.
**D. SAVE.** It isn't recorded anywhere, and a future session working on Instantly refills would otherwise trust a 200 response and miss that nothing happened.
**E. SKIP.** This is general knowledge, and it wouldn't change how a future session acts.
Fable 5.1
5/5
5.5 s · 913 tokens in / 215 out · $0.0290 · 100% auto-checks
Read the answer
A. SKIP — already recorded in the acme site doc; a future session would read it there.
B. SAVE — the next session that adds or debugs a cron job on web02 would otherwise write a bare `wp` call and get a silent failure; not written anywhere yet.
C. SKIP — already in AGENTS.md, which future sessions load.
D. SAVE — the next session that runs or verifies an Instantly refill would otherwise trust a 200 + empty list as success; it needs to check key validity or non-empty results instead, and this isn't documented anywhere.
E. SKIP — general knowledge the model already has; no session changes behavior because of a saved note.
90.4 s · 14,128 tokens in / 602 out · $0.0000 · 100% auto-checks
Read the answer
A. SKIP: already recorded in the acme site doc.
B. SAVE: future web02 cron work must use the pinned ea-php82 `wp` binary to avoid silent failures.
C. SKIP: already recorded in AGENTS.md.
D. SAVE: future Instantly refill work must check for a non-empty result or re-read the API, because expired keys can cause false success.
E. SKIP: general knowledge, not a concrete new future-session action.
Recursive Flint 40B (open)
5/5
21.2 s · 488 tokens in / 1,112 out · $0.0000 · 0% auto-checks
Read the answer
- **A — SKIP** — Already recorded in the acme site doc, so it doesn’t meet the “not already recorded” condition.
- **B — SAVE** — A future web02 cron debugging session should pin `ea-php82` when bare `wp` calls fail silently under the CGI SAPI.
- **C — SKIP** — Already recorded in AGENTS.md.
- **D — SAVE** — A future Instantly integration/refill session should check for an empty list / expired key before trusting a successful refill response.
- **E — SKIP** — It’s general benchmarking knowledge rather than a concrete future-session memory.
Ornith 1.5 122B, raw (open)
5/5
11.1 s · 537 tokens in / 236 out · $0.0000 · 100% auto-checks
Read the answer
**A. SKIP** — already recorded in the acme site doc.
**B. SAVE** — not written anywhere; a future web02 deploy/cron-debug session would pin `ea-php82` instead of chasing phantom failures.
**C. SKIP** — already in AGENTS.md.
**D. SAVE** — not written anywhere; a future session debugging an "empty but successful" Instantly refill would check key validity first.
**E. SKIP** — general knowledge, no session would act differently.
Ornith 1.5 122B + rules + thinking (open)
5/5
24.2 s · 6,124 tokens in / 510 out · $0.0000 · 100% auto-checks
Read the answer
A. SKIP — already recorded in the acme site doc, so it fails the "not already in the repo" test.
B. SAVE — a future web02 cron/ops session would run bare `wp` and hit the silent CGI-SAPI failure; not written anywhere yet.
C. SKIP — already in AGENTS.md, so it's redundant.
D. SAVE — a future session refilling via the Instantly API would trust a 200 and miss an expired key; not written anywhere yet.
E. SKIP — general knowledge, no concrete future session that would act differently, and it's not a specific fact about this system.
Nanbeige 4.3 33B (open)
5/5
39.8 s · 559 tokens in / 597 out · $0.0000 · 100% auto-checks
Read the answer
**A. SKIP** — the update result is already recorded in the acme site doc, so saving it adds nothing.
**B. SAVE** — a future session troubleshooting cron on web02 would pin `ea-php82` instead of chasing silent CGI-SAPI failures, and this isn't written anywhere yet.
**C. SKIP** — Blake's preference is already in AGENTS.md, so the repo already covers it.
**D. SAVE** — a future session running an Instantly refill would check for an empty list before declaring success, and this edge case isn't documented anywhere yet.
**E. SKIP** — that's general knowledge, not a concrete fact that would change any specific future session's behavior.
Ornith 1.5 35B (open)
5/5
7.7 s · 557 tokens in / 262 out · $0.0000 · 100% auto-checks
Read the answer
A. **SKIP** — already recorded in the acme site doc, so no future session needs to be re-taught it.
B. **SAVE** — not written anywhere, and a future session on web02 will act differently by pinning `ea-php82` instead of calling bare `wp`.
C. **SKIP** — already in AGENTS.md, so it's not a memory gap.
D. **SAVE** — not written anywhere, and a future session debugging an Instantly refill will check for the silent 200-empty-list success instead of trusting the API.
E. **SKIP** — general knowledge, not a durable, actionable fact.
Sonnet 5.5
4/5
4.0 s · 917 tokens in / 238 out · $0.0060 · 100% auto-checks
Read the answer
**A. SKIP.** It's a one-time status already recorded in the acme site doc, so no future session would act differently.
**B. SAVE.** It's a non-obvious gotcha about web02 that isn't written anywhere. A future session writing or debugging cron jobs there would pin ea-php82 instead of hitting silent failures.
**C. SKIP.** AGENTS.md already records it, so a memory would duplicate it.
**D. SAVE.** A 200 with an empty list on an expired key is a misleading failure mode that isn't documented. A future session debugging or building an Instantly refill would check key validity rather than trusting the success response.
**E. SKIP.** It's general knowledge that changes no future behavior.
Opus 5.5
4/5
5.4 s · 914 tokens in / 256 out · $0.0124 · 100% auto-checks
Read the answer
**A. SKIP.** The acme site doc already records this, so it would only duplicate the repo.
**B. SAVE.** A future session that writes or debugs a cron job on web02 will pin `ea-php82` from the start and won't lose time chasing a silent failure. It isn't written down anywhere yet.
**C. SKIP.** AGENTS.md already says this, and sessions load that file anyway.
**D. SAVE.** A future session running or checking an Instantly refill will confirm that the returned list isn't empty, or that the key is still valid, before calling it a success. Otherwise it may report a no-op as done. This isn't recorded anywhere yet.
**E. SKIP.** This is general knowledge and won't change how any session behaves.
Result: save B and D only.
Qwen 3.8 FP4 Local, raw (1 Spark)
3/5
24.8 s · 519 tokens in / 214 out · $0.0000 · 100% auto-checks
Read the answer
**A. SKIP**
This is a routine operational log of a standard action (`wp plugin update`) that does not change future decision-making, and the site doc already covers the status.
**B. SAVE**
Knowing that bare `wp` calls in cron jobs fail silently due to the wrong SAPI will cause you to explicitly use the `ea-php82` binary in all future cron entries to avoid debugging silent failures.
**C. SKIP**
This preference is already documented in `AGENTS.md`, so storing it again creates redundancy without changing future behavior.
**D. SAVE**
This is a critical, non-obvious failure mode (false-positive success) that will cause you to add specific validation checks (e.g., verifying item counts or checking for 401/403 status codes despite 200 responses) in future scripts that use the Instantly API.
**E. SKIP**
This is general knowledge about Lighthouse behavior that does not require a specific project memory to change future actions.
Qwen 3.8 Flash + rules + thinking (open)
2/5
82.2 s · 13,978 tokens in / 2,113 out · $0.0000 · 0% auto-checks
Read the answer
A SKIP: it is already in the acme site doc.
B SKIP: it is already covered by the Fleet wp-cli PHP gotcha memory, which warns against bare `wp` and says to pin the correct PHP binary.
C SKIP: it is already in AGENTS.md.
D SAVE: it is a new Instantly API trap, and future refill sessions need to check the real API result instead of trusting a success log.
E SKIP: it is general knowledge and is already handled by the speed-pass warm double-run rule.
Qwen 3.8 Flash, raw (open)
2/5
16.6 s · 539 tokens in / 185 out · $0.0000 · 100% auto-checks
Read the answer
**A. SKIP** — Redundant with the acme site doc, so it adds no new value to the repo.
**B. SAVE** — This is a specific, non-obvious environment gotcha not documented elsewhere, and future sessions debugging silent cron failures on web02 will need this exact detail to fix it quickly.
**C. SKIP** — Already recorded in AGENTS.md, so saving it again violates the rule against duplicating repo documentation.
**D. SAVE** — This is a critical failure mode in the AI-ops tooling that could lead to false positives in automation; future sessions building or debugging Instantly integrations must know that HTTP 200 with an empty body can indicate an expired key.
**E. SKIP** — This is general knowledge about Lighthouse behavior and does not describe a specific future session or action unique to this business’s workflow.
Qwen 3.8 Flash + my rules (open)
2/5
9.0 s · 13,941 tokens in / 142 out · $0.0000 · 100% auto-checks
Read the answer
A. SKIP — already recorded in the acme site doc, so a new memory adds only cost.
B. SAVE — a future session doing cron work on web02 would silently write broken jobs without this; not recorded yet, though the index has a similar "bare `wp` = server-default PHP" line worth checking before creating a duplicate.
C. SKIP — already covered by AGENTS.md.
D. SAVE — a future Instantly/refill session would report false success without this API gotcha; not written anywhere and exactly the kind of silent trap memory should catch.
E. SKIP — general knowledge any session already has; no concrete future session acts differently on it.
Plan a risky live change with backup, verify and rollback
Pick: nobody passed reliably
The prompt every model got
Plan (do not execute) a WordPress core update 7.1.2 -> 7.1.3 on a live WooCommerce site on web02 (user `acme`, ea-php82, Breeze cache, Postmark mail). Fleet rules: read `bbs site acme` first; run wp-cli via `bbs wp acme -- ...` (never --allow-root); prove done with `bbs verify`; Todoist is comment-only. Command syntax: `bbs verify ` where check is http, core, plugin, theme, file or option; database backup `bbs wp acme -- db export `; files backup with tar run as the site user. Give numbered steps with the exact commands, what you check after each, and the rollback. Under 250 words.
Sonnet 5.5
3/5
11.0 s · 864 tokens in / 1,326 out · $0.0167 · 86% auto-checks
Read the answer
**Plan (not executed). Assumes docroot `/home/acme/public_html`; confirm in step 1.**
1. `bbs site acme`: confirm docroot, PHP (ea-php82), and the Breeze/Postmark/WooCommerce plugins. Pick a low-traffic window.
2. Pre-checks:
- `bbs wp acme -- core check-update`
- `bbs wp acme -- plugin list --update=available`
- `bbs verify acme http`
- `bbs verify acme core`
Check that the baseline is healthy and 7.1.3 is offered.
3. Backups:
- `bbs wp acme -- db export /home/acme/backups/pre-7.1.3.sql`
- `sudo -u acme tar -czf /home/acme/backups/pre-7.1.3-files.tgz -C /home/acme public_html`
Check that both files exist, are non-empty, and `tar -tzf` lists them cleanly.
4. Update:
- `bbs wp acme -- core update --version=7.1.3`
- `bbs wp acme -- core update-db`
Check for success output with no errors.
5. Clear caches: `bbs wp acme -- cache flush`, then purge Breeze from wp-admin (or via its CLI command if installed).
6. Prove it:
- `bbs verify acme core`
- `bbs verify acme http`
- `bbs verify acme plugin`
- `bbs verify acme theme`
Also run `bbs wp acme -- core version`, which should show 7.1.3. Manually check the shop, cart, checkout, and a test order. Confirm the order email appears in Postmark activity.
7. Todoist: add a comment with the versions, backup paths, and verify results. Don't change status or close the task.
**Rollback (if any check fails):**
1. `bbs wp acme -- core download --version=7.1.2 --force --skip-content`
2. If the DB changed: `bbs wp acme -- db import /home/acme/backups/pre-7.1.3.sql`
3. If files are damaged: `sudo -u acme tar -xzf /home/acme/backups/pre-7.1.3-files.tgz -C /home/acme`
4. Flush caches, re-run `bbs verify acme core` and `bbs verify acme http`, and add a Todoist comment about the rollback.
Opus 5.5
3/5
12.3 s · 860 tokens in / 1,234 out · $0.0316 · 86% auto-checks
Read the answer
# Plan: WP core 7.1.2 → 7.1.3 on acme (web02)
1. **Read site record:** `bbs site acme`
Check: docroot, PHP (ea-php82), Breeze and Postmark plugin slugs. The paths below assume `/home/acme/public_html`, so adjust them to match.
2. **Baseline:**
`bbs verify acme http`
`bbs verify acme core`
Check: HTTP 200 and core reports 7.1.2. Stop if either fails.
3. **Database backup:**
`bbs wp acme -- db export /home/acme/backups/pre-713-$(date +%F).sql`
Check: the file exists and is non-zero.
4. **Files backup:**
`sudo -u acme tar -czf /home/acme/backups/pre-713-files-$(date +%F).tgz -C /home/acme public_html`
Check: `tar -tzf` lists `wp-config.php`.
5. **Update core:**
`bbs wp acme -- core update --version=7.1.3`
`bbs wp acme -- core update-db`
`bbs wp acme -- core verify-checksums`
Check: no errors and checksums pass.
6. **Clear cache:**
`bbs wp acme -- breeze purge --cache=all`
7. **Prove done:**
`bbs verify acme core` (expect 7.1.3)
`bbs verify acme http`
`bbs verify acme plugin woocommerce`
`bbs verify acme plugin <postmark-slug>`
Check: all pass. Manually test shop, cart and checkout pages, and send a Postmark test email.
8. **Todoist:** add a comment with the versions, backup filenames and verify output. Don't close or edit the task.
## Rollback (if step 5 or 7 fails)
1. `bbs wp acme -- core update --version=7.1.2 --force`
2. If the database schema changed or data broke, run `bbs wp acme -- db import /home/acme/backups/pre-713-<date>.sql`.
3. If files are damaged, run `sudo -u acme tar -xzf /home/acme/backups/pre-713-files-<date>.tgz -C /home/acme`.
4. `bbs wp acme -- breeze purge --cache=all`
5. `bbs verify acme core` (expect 7.1.2) and `bbs verify acme http`.
6. Add a Todoist comment describing the failure and rollback.
Note: take a WooCommerce order count before step 5. If you restore the database, any orders placed during the window are lost, so schedule this for low traffic.
Haiku 5.5
2/5
10.8 s · 861 tokens in / 2,173 out · $0.0013 · 86% auto-checks
Read the answer
**Plan only. Nothing has been executed.**
1. **Read site config.** Run `bbs site acme` and confirm the docroot, site user, PHP version, and that Breeze and Postmark are configured as expected.
2. **Baseline.** Run:
- `bbs wp acme -- core version` (expect 7.1.2)
- `bbs verify acme http` (expect 200 on home, shop, and checkout)
- `bbs verify acme core`
Save the output.
3. **Database backup.** Run `bbs wp acme -- db export /home/acme/backups/pre-7.1.3.sql`. Check that the file exists and is non-empty, and that its tail reads `-- Dump completed`.
4. **Files backup.** As the site user, run `sudo -u acme tar -czf /home/acme/backups/pre-7.1.3-files.tgz -C /home/acme/public_html .`. Check with `tar -tzf` that the archive lists `wp-config.php` and `wp-content/`.
5. **Pre-flight.** Run `bbs wp acme -- plugin update --all --dry-run` and `bbs wp acme -- core check-update`. Confirm WooCommerce compatibility with 7.1.3 before proceeding.
6. **Update.** Run `bbs wp acme -- core update --version=7.1.3`, then `bbs wp acme -- core update-db`. Check that `core version` returns 7.1.3 and that `bbs wp acme -- core verify-checksums` passes.
7. **Cache.** Purge Breeze from its admin page (I haven't confirmed a CLI command for this), then flush object cache if used.
8. **Verify.** Run `bbs verify acme core`, `bbs verify acme http`, `bbs verify acme plugin`, and `bbs verify acme option`. Then do a manual WooCommerce checkout smoke test and send a Postmark test email.
9. **Todoist.** Add a comment with the results only. Don't create or close tasks.
**Rollback** (if step 6 or 8 fails):
- Restore core: `bbs wp acme -- core download --version=7.1.2 --force`. This replaces core files only, not wp-content or wp-config.
- Restore DB if needed: `bbs wp acme -- db import /home/acme/backups/pre-7.1.3.sql`.
- Restore files if needed, as the site user: `sudo -u acme tar -xzf /home/acme/backups/pre-7.1.3-files.tgz -C /home/acme/public_html`.
- Confirm with `bbs wp acme -- core version` and `bbs verify acme core`.
Qwen 3.8 Flash + rules + thinking (open)
2/5
101.5 s · 13,950 tokens in / 2,442 out · $0.0000 · 100% auto-checks
Read the answer
1. `bbs site acme`
Check: host, user, docroot, PHP 82, Breeze, Postmark, known gotchas.
2. `bbs verify acme http`
`bbs verify acme core`
Check: site returns its normal live state; core reads 7.1.2.
3. `bbs wp acme -- db export /home/acme/wp713-db.sql`
Check: command succeeds and file exists at the full path.
4. `tar -czf /home/acme/wp713-files.tar.gz -C /home/acme/public_html .`
Run as `acme`. Check: tar succeeds; file is readable by `acme`.
5. `bbs wp acme -- core update`
Check: command finishes without fatal error.
6. `bbs wp acme -- core update-db`
Check: command finishes without error.
7. `bbs wp acme -- breeze clear-cache`
Check: cache purge reports success.
8. `bbs verify acme http`
`bbs verify acme core`
`bbs verify acme plugin`
`bbs verify acme theme`
Check: HTTP normal, core reads 7.1.3, active plugin/theme checks PASS. Then manually test WooCommerce checkout: add to cart, reach checkout, see expected shipping/tax/Stripe or payment button. Confirm order email attempts via Postmark.
9. Rollback if failed:
`bbs wp acme -- db import /home/acme/wp713-db.sql`
Then, as `acme`: `tar -xzf /home/acme/wp713-files.tar.gz -C /home/acme/public_html`
Then: `bbs wp acme -- breeze clear-cache`
Then rerun Step 8.
10. Todoist: comment only. State result, verify results, backup paths, and “task not closed.”
Fable 5.1
2/5
13.1 s · 860 tokens in / 920 out · $0.0632 · 86% auto-checks
100.8 s · 14,101 tokens in / 927 out · $0.0000 · 100% auto-checks
Read the answer
1. Read site context: `bbs site acme`; confirm docroot, PHP, Breeze, mail.
2. Backup DB: `bbs wp acme -- db export /home/acme/backups/acme-db-712.sql`; check file exists and is not empty.
3. Backup files as site user: `su - acme -c "tar -czf /home/acme/backups/acme-files-712.tgz -C /home/acme/public_html ."`; check archive exists.
4. Put site in maintenance: `bbs wp acme -- maintenance activate 300`; check homepage shows maintenance, not a fatal error.
5. Update core: `bbs wp acme -- core update --version=7.1.3`; check command success.
6. Update database: `bbs wp acme -- core update-db`; check command success.
7. End maintenance: `bbs wp acme -- maintenance deactivate`; check homepage loads.
8. Verify core: `bbs verify acme core`; expect `PASS` with 7.1.3.
9. Verify site: `bbs verify acme http`; expect normal HTTP status.
10. Test money path: add test product to cart and reach checkout. Also test contact/login path if present.
11. Purge Breeze from wp-admin, then check homepage CSS, images, cart, and checkout.
12. Rollback if any verify or money-path test fails: restore files with `su - acme -c "tar -xzf /home/acme/backups/acme-files-712.tgz -C /home/acme/public_html"`, restore DB with `bbs wp acme -- db import /home/acme/backups/acme-db-712.sql`, purge Breeze, re-check steps 8-10.
13. Todoist: comment only with what was done, real check results, and backup paths.
Recursive Flint 40B (open)
2/5
51.5 s · 466 tokens in / 2,097 out · $0.0000 · 100% auto-checks
Read the answer
Plan only — do not execute.
1. Read state first:
- `bbs site acme`
- `bbs wp acme -- core version`
- Check: expect `7.1.2`.
2. Backups before update:
- DB: `bbs wp acme -- db export /tmp/acme-db-before-7.1.2.sql`
- Files as acme: `runuser -u acme tar -czf /tmp/acme-files-before-7.1.2.tar.gz <acme-webroot>`
- Check: backups exist and are readable.
3. Update core:
- `bbs wp acme -- core update 7.1.3`
- Check: `bbs wp acme -- core version` returns `7.1.3`.
4. Clear cache/runtime:
- `bbs wp acme -- cache flush`
- Check: `bbs verify acme core`
5. Verify live:
- `bbs verify acme http`
- `bbs verify acme core`
- Check: HTTP 200 and core `7.1.3`.
Rollback:
- If bad: `bbs wp acme -- core version 7.1.2`
- Restore DB: `bbs wp acme -- db import /tmp/acme-db-before-7.1.2.sql`
- Restore files from tar as acme.
- `bbs wp acme -- cache flush`
- Re-run `bbs verify acme core` and `bbs verify acme http`.
Ornith 1.5 122B, raw (open)
2/5
38.5 s · 511 tokens in / 1,043 out · $0.0000 · 100% auto-checks
Read the answer
## WordPress 7.1.2 → 7.1.3 update plan (web02, site `acme`)
**Pre-flight**
1. `bbs site acme` — confirm host is web02, current core = 7.1.2, WooCommerce active, services (ea-php82, Breeze, Postmark) healthy. *Check:* output shows 7.1.2 and no errors.
2. Note a timestamp var: `TS=$(date +%Y%m%d-%H%M%S)`.
**Backups**
3. DB: `bbs wp acme -- db export /var/backups/acme-wp-$TS.sql` — *Check:* file exists and size > 0.
4. Files (as site user): `bbs ssh acme "su - acme -c \"tar -czf ~/acme-wp-files-$TS.tar.gz public_html\""`. — *Check:* tar completes, archive present.
**Pre-update**
5. Flush Breeze cache: `bbs wp acme -- breeze purge` (or cache flush) — *Check:* success message.
**Update**
6. `bbs wp acme -- core update` — *Check:* "Success: WordPress updated to 7.1.3", no fatal errors.
**Verify (prove done)**
7. `bbs verify acme core` — *Check:* reports 7.1.3.
8. `bbs verify acme http` — *Check:* 200/OK.
9. `bbs verify acme plugin` — *Check:* WooCommerce active, no broken plugins.
**Document**
10. Todoist (comment-only): add a comment on the deploy task summarizing version, backups, verify results. Do **not** mark the task done via Todoist.
**Rollback** (if core/plugin break)
- `bbs wp acme -- core update 7.1.2` (or `core download --force --version=7.1.2`).
- Restore files: `su - acme -c "tar -xzf ~/acme-wp-files-$TS.tar.gz -C public_html"`.
- Restore DB: `bbs wp acme -- db import /var/backups/acme-wp-$TS.sql`.
- Re-verify with steps 7–9.
Ornith 1.5 122B + rules + thinking (open)
2/5
77.0 s · 6,100 tokens in / 1,237 out · $0.0000 · 100% auto-checks
Read the answer
**Plan: WordPress core update 7.1.2 → 7.1.3 (acme, web02)**
1. **Read context.** `bbs site acme` — confirm host, user, docroot, PHP, cache=Breeze, mail=Postmark, and current core version. Unknown until it prints.
2. **Back up database.** `bbs wp acme -- db export /home/acme/backups/acme-core-<timestamp>.sql` — confirm the file exists and is non-empty.
3. **Back up files.** As the site user: `tar -czf /home/acme/backups/acme-files-<timestamp>.tar.gz wp-content` (full site for a full rollback). Confirm the tarball size.
4. **Update core.** `bbs wp acme -- core update`, then `bbs wp acme -- core update-db`. Pin target: `bbs wp acme -- core version` must read **7.1.3**.
5. **Purge cache.** Use the exact Breeze purge command named in `bbs site acme` gotchas (do not invent one).
6. **Verify.** `bbs verify acme http` and `bbs verify acme core` (expect 7.1.3), plus a real test of the money path (checkout or login).
7. **Rollback.** Restore DB: `bbs wp acme -- db import <backup.sql>`; restore files: `tar -xzf <backup.tar.gz>`; re-run `bbs verify acme http core`.
8. **Todoist:** comment only — outcome, each check with its real result, and the backup paths. Never close the task.
Note: I cannot see the live site, so every version/status above is a target to confirm with the commands, not a checked fact.
Nanbeige 4.3 33B (open)
2/5
106.4 s · 529 tokens in / 1,651 out · $0.0000 · 100% auto-checks
Read the answer
**WordPress core update plan — acme, 7.1.2 → 7.1.3 (web02, ea-php82, Breeze cache, Postmark)**
1. **Read site state:** `bbs site acme` — confirm docroot, PHP 8.2, Breeze, Postmark, live status.
2. **DB backup:** `bbs wp acme -- db export /backups/acme-db-$(date +%F).sql` — check file exists, non-empty.
3. **Files backup:** as site user — `sudo -u acme tar -czf /backups/acme-files-$(date +%F).tar.gz <docroot>` — check `tar -tzf … | tail` lists files.
4. **Update core:** `bbs wp acme -- core update --to 7.1.3` — check for success or plugin/theme conflicts (never pass `--allow-root`).
5. **Verify core:** `bbs verify acme core` — must pass on 7.1.3.
6. **Verify health:** `bbs verify acme http`, `bbs verify acme plugin` (WooCommerce active), `bbs verify acme theme`, `bbs verify acme option` (Postmark/admin settings intact).
7. **Cache purge:** `bbs wp acme -- cache flush` (Breeze) — re-check `bbs verify acme http` returns 200 with no stale 7.1.2 assets.
8. **Log:** Todoist — comment-only entry with version, timestamp, verification results (no task creation).
**Rollback (any check fails):**
- `bbs wp acme -- core update --to 7.1.2`
- `bbs wp acme -- db import /backups/acme-db-<date>.sql`
- As acme user: `tar -xzf /backups/acme-files-<date>.tar.gz -C <docroot parent>`
- `bbs wp acme -- cache flush`; re-run `bbs verify acme http core plugin theme option`.
All wp-cli work goes through `bbs wp acme --` only.
Ornith 1.5 35B (open)
2/5
23.9 s · 530 tokens in / 977 out · $0.0000 · 100% auto-checks
Read the answer
1. `bbs site acme` → confirm web02, ea-php82, Breeze, Postmark, WP 7.1.2, active plugin/theme, DB name.
2. Todoist: add **comment-only** task "WP 7.1.2→7.1.3 core update (web02/acme)".
3. DB backup: `bbs wp acme -- db export ~/acme-7.1.2.sql` (verify non-empty).
4. Files backup (as site user): `bbs ssh acme -- 'sudo -u acme tar -czf ~/acme-files-7.1.2.tar.gz -C ~/public_html . --exclude=./wp-content/cache'`.
5. `bbs wp acme -- plugin deactivate breeze` (Breeze cache off during update).
6. Core update: `bbs wp acme -- core update --version=7.1.3 --allow-update-reverted`.
7. Post-update checks: `bbs wp acme -- core version` (expect 7.1.3); `bbs wp acme -- plugin get woocommerce --field=status`; `bbs wp acme -- theme get <name> --field=status`; `bbs wp acme -- option get <key> --field=value` for a couple of options.
8. `bbs wp acme -- plugin activate breeze`, `bbs wp acme -- cache flush`, then prove live: `bbs verify acme http`, `bbs verify acme core`, `bbs verify acme plugin`, `bbs verify acme theme`, `bbs verify acme file`, `bbs verify acme option`. Confirm WooCommerce checkout + a Postmark test email.
9. Rollback if any check fails: `bbs wp acme -- db import ~/acme-7.1.2.sql`, restore files (`tar -xzf ~/acme-files-7.1.2.tar.gz -C ~/public_html`), then `bbs wp acme -- core update --version=7.1.2`.
Qwen 3.8 Flash + my rules (open)
2/5
5.3 s · 13,914 tokens in / 63 out · $0.0000 · 57% auto-checks
Read the answer
1. Run `bbs site acme` first. Check the docroot, PHP version, cache, and any site-specific flags listed there.
2. Run `bbs wp acme -- db export /home/acme/backups/dump.sql`. Check that the command prints a success line.
Qwen 3.8 Flash, raw (open)
1.5/5
31.2 s · 510 tokens in / 372 out · $0.0000 · 100% auto-checks
Read the answer
Plan for WordPress Core Update 7.1.2 -> 7.1.3 on web02 (Acme)
1. Check fleet status: `bbs site acme`. Confirm site is healthy and Postmark/ea-php82 are stable.
2. Backup files: Switch to site user `acme` and run `tar -czf /home/acme/backup_files_$(date +%F).tar.gz /home/acme/public_html`.
3. Backup database: Run `bbs wp acme -- db export /home/acme/backup_db_$(date +%F).sql`.
4. Update core: Run `bbs wp acme -- core update --version=7.1.3`.
5. Flush cache: Run `bbs wp acme -- breeze flush-cache`.
6. Verify HTTP status: Run `bbs verify acme http`.
7. Verify core version: Run `bbs wp acme -- core version` (ensure it outputs 7.1.3).
8. Postmark email test: Use WP admin or CLI to trigger a password reset or WooCommerce confirmation email to verify mail delivery.
9. Log completion: Use Todoist CLI/API to add a comment-only note with the timestamp and backup file paths.
Rollback Plan (if verify fails):
1. Restore files: As `acme`, extract the backup: `tar -xzf /home/acme/backup_files_[date].tar.gz -C /home/acme/public_html`.
2. Restore database: Run `bbs wp acme -- db import /home/acme/backup_db_[date].sql`.
3. Re-verify: `bbs verify acme http` and `bbs verify acme core`.
Qwen 3.8 FP4 Local, raw (1 Spark)
1/5
53.2 s · 492 tokens in / 417 out · $0.0000 · 100% auto-checks
Read the answer
Here is the update plan for `web02` (site `acme`), strictly following the fleet rules.
1. **Read Fleet Rules**: Execute `bbs site acme`. Record the site status, PHP version (confirm `ea-php82`), and plugin/theme inventory to verify against the `7.1.3` changelog.
2. **Create Backups**:
- **Database**: `bbs wp acme -- db export /home/acme/backup-db-$(date +%F).sql`
- **Files**: Run `tar -czf /home/acme/backup-site-$(date +%F).tar.gz /home/acme/public_html`
- *Check*: Ensure both backup files are created with correct sizes.
3. **Update Core**: Execute `bbs wp acme -- core update --version=7.1.3`.
4. **Update Dependencies**: Run `bbs wp acme -- core update-db` and `bbs wp acme -- plugin update --all` (for security/compatibility).
5. **Clear Cache**: Execute `bbs wp acme -- breeze-purge-cache`.
6. **Verify Success**: Run the specific checks:
- `bbs verify acme core` (must output "OK")
- `bbs verify acme http` (must output "200")
- *Check*: Verify `wp core version` returns `7.1.3`.
7. **Rollback (If verification fails)**:
- Restore Database: `bbs wp acme -- db import /home/acme/backup-db-$(date +%F).sql`
- Restore Files: `tar -xzf /home/acme/backup-site-$(date +%F).tar.gz -C /home/acme/`
*Note: All `wp-cli` commands run as `acme`. No `--allow-root` is used.
Catch a dashboard 'success' that isn't true (agentic)
Pick: Haiku 5.5
The prompt every model got
Read README.txt in this folder. MainWP says every update on acmeplumbing.com succeeded. Check that claim against the live plugin list. Reply with: which plugins really updated, which did not (with the version each is actually on), and the one-line Todoist status you would post.
Haiku 5.5
5/5
7.1 s · 17,593 tokens in / 942 out · $0.0010 · 100% auto-checks
Read the answer
**Verdict: MainWP's "all succeeded" is wrong.** Two of the nine updates did not stick.
**Really updated (live version matches the MainWP target):**
- elementor: 3.32.0
- breeze: 2.2.19
- wordfence: 8.1.1
- wp-mail-smtp: 4.7.0
- woocommerce: 10.2.2
- yoast-seo: 26.2 (live slug is `wordpress-seo`, same plugin)
- mainwp-child: 5.4.0.13
**Did not update:**
- **elementor-pro**: still on **3.31.1**, update still available (MainWP said 3.32.0).
- **gravityforms**: still on **2.9.4**, update still available (MainWP said 2.9.6).
Both are active, so the site is running older versions of Elementor Pro and Gravity Forms than MainWP reports.
**Todoist status line:**
"acmeplumbing.com: 7 of 9 plugin updates verified live; elementor-pro (stuck at 3.31.1) and gravityforms (stuck at 2.9.4) failed despite MainWP reporting success. Needs manual update."
I don't have a Todoist tool in this session, so I haven't posted this. Let me know if you want it posted another way.
Sonnet 5.5
5/5
9.0 s · 17,870 tokens in / 873 out · $0.0195 · 100% auto-checks
Read the answer
The MainWP "all success" claim is wrong. Two of the nine updates did not apply.
**Really updated (live version matches the report):**
- elementor: 3.32.0
- breeze: 2.2.19
- wordfence: 8.1.1
- wp-mail-smtp: 4.7.0
- woocommerce: 10.2.2
- mainwp-child: 5.4.0.13
- Yoast SEO: 26.2. MainWP calls it `yoast-seo` and the live list calls it `wordpress-seo`. I'm treating them as the same plugin because the version matches.
**Did not update, despite MainWP saying success:**
- **elementor-pro** is on 3.31.1. MainWP reported 3.32.0, and the live list still shows an update available.
- **gravityforms** is on 2.9.4. MainWP reported 2.9.6, and the live list still shows an update available.
Both failed plugins are premium ones. The cause may be a license or update-source problem, but the files don't say. Elementor Pro is also now one version behind Elementor core (3.32.0), which can cause compatibility problems.
**Todoist status:**
"acmeplumbing.com updates: 7 of 9 applied. Elementor Pro (still 3.31.1) and Gravity Forms (still 2.9.4) failed even though MainWP said success. Needs a manual update and a license check."
Opus 5.5
5/5
11.0 s · 17,550 tokens in / 871 out · $0.0377 · 100% auto-checks
Read the answer
MainWP's "all succeeded" claim is wrong. Two of the nine updates didn't happen.
**Really updated (7):**
- elementor: 3.31.2 → 3.32.0
- breeze: 2.2.18 → 2.2.19
- wordfence: 8.1.0 → 8.1.1
- wp-mail-smtp: 4.6.0 → 4.7.0
- woocommerce: 10.2.1 → 10.2.2
- mainwp-child: 5.4.0.12 → 5.4.0.13
- Yoast SEO: 26.1 → 26.2. MainWP calls it `yoast-seo`, but on the live site it's `wordpress-seo`. Same plugin, and it's on 26.2.
**Not updated (2):**
- **elementor-pro**: still on **3.31.1** (MainWP said 3.32.0). The live list still shows an update available.
- **gravityforms**: still on **2.9.4** (MainWP said 2.9.6). The live list still shows an update available.
Both are paid plugins, so my guess is an expired license key or a failed download. MainWP reported both as "success" anyway. Elementor itself is now on 3.32.0 but Pro is still on 3.31.1. That mismatch can break the page editor or Pro widgets, so check the site front end and the editor.
(akismet is inactive on 5.5 and wasn't part of the run.)
**Todoist status:**
`acmeplumbing.com: 7/9 updates confirmed live; elementor-pro (still 3.31.1) and gravityforms (still 2.9.4) did NOT update despite MainWP "success". Check licenses and update manually, and check Elementor/Pro version mismatch.`
126.3 s · 72,168 tokens in / 1,528 out · $0.0000 · 100% auto-checks
Read the answer
MainWP lied about 2 of 9. Checked live versions against the report (yoast-seo in the report = wordpress-seo on the live list, and it did land).
**Really updated (7 of 9):**
- elementor → 3.32.0
- breeze → 2.2.19
- wordfence → 8.1.1
- wp-mail-smtp → 4.7.0
- woocommerce → 10.2.2
- wordpress-seo (reported as yoast-seo) → 26.2
- mainwp-child → 5.4.0.13
**Did NOT update, despite MainWP saying success (2):**
- elementor-pro — still on **3.31.1** (wanted 3.32.0), and the live list still shows an update available
- gravityforms — still on **2.9.4** (wanted 2.9.6), also still shows update available
**Todoist status I would post (comment only, never closing the task):**
> 7 of 9 plugin updates actually landed on acmeplumbing.com. MainWP reported all 9 as success, but the live site shows Elementor Pro is still on 3.31.1 and Gravity Forms is still on 2.9.4, and both still show an update waiting. The other 7 (Elementor, Breeze, Wordfence, WP Mail SMTP, WooCommerce, Yoast, MainWP Child) are on their new versions, confirmed by reading the live plugin list. These two need a re-run or a manual update, and nothing on the site was changed by this check.
Recursive Flint 40B (open)
5/5
269.6 s · 11,170 tokens in / 11,365 out · $0.0000 · 100% auto-checks
Read the answer
**Verdict:** MainWP's report says `status: "success"` with every update marked success — but the live plugin list contradicts that for two plugins.
**✅ Really updated (live version confirms the new version is installed, no pending update):**
- elementor → 3.32.0 (was 3.31.2)
- breeze → 2.2.19 (was 2.2.18)
- mainwp-child → 5.4.0.13 (was 5.4.0.12)
- woocommerce → 10.2.2 (was 10.2.1)
- wordfence → 8.1.1 (was 8.1.0)
- wp-mail-smtp → 4.7.0 (was 4.6.0)
- wordpress-seo → 26.2 (was 26.1)
**❌ Did NOT update (MainWP claimed success, but live list shows otherwise):**
- elementor-pro → actually still on **3.31.1** (update to 3.32.0 available)
- gravityforms → actually still on **2.9.4** (update to 2.9.6 available)
So the "every update succeeded" claim is wrong: **Elementor Pro** and **Gravity Forms** updates did not actually apply.
**Todoist status:** "Elementor Pro & Gravity Forms updates failed to apply — retry needed (still on 3.31.1 / 2.9.4)."
Ornith 1.5 122B + rules + thinking (open)
5/5
75.8 s · 38,101 tokens in / 1,141 out · $0.0000 · 100% auto-checks
Read the answer
MainWP claimed all 9 updates succeeded. Live check: **7 really updated, 2 did not.**
**Really updated (live list confirms, status = none):**
- elementor → 3.32.0
- breeze → 2.2.19
- wordfence → 8.1.1
- wp-mail-smtp → 4.7.0
- woocommerce → 10.2.2
- wordpress-seo (Yoast) → 26.2
- mainwp-child → 5.4.0.13
**Did NOT update (still shows an available update on the live list):**
- elementor-pro → still on **3.31.1** (MainWP claimed 3.32.0)
- gravityforms → still on **2.9.4** (MainWP claimed 2.9.6)
**Todoist status line:**
"7 of 9 plugins updated; elementor-pro (still 3.31.1) and gravityforms (still 2.9.4) did not, even though MainWP reported success — re-run those two."
Nanbeige 4.3 33B (open)
5/5
143.6 s · 16,298 tokens in / 1,656 out · $0.0000 · 100% auto-checks
Read the answer
I read the README and both data files, then cross-checked each of MainWP's 9 claimed updates against the live plugin list.
**Verdict: MainWP's claim is wrong — only 7 of 9 updates actually landed.**
**Plugins that really updated (7):**
| Plugin | Claimed | Live |
|---|---|---|
| breeze | 2.2.18 → 2.2.19 | 2.2.19 ✓ |
| elementor | 3.31.2 → 3.32.0 | 3.32.0 ✓ |
| wordfence | 8.1.0 → 8.1.1 | 8.1.1 ✓ |
| wp-mail-smtp | 4.6.0 → 4.7.0 | 4.7.0 ✓ |
| woocommerce | 10.2.1 → 10.2.2 | 10.2.2 ✓ |
| yoast-seo | 26.1 → 26.2 | 26.2 ✓ (listed as `wordpress-seo`) |
| mainwp-child | 5.4.0.12 → 5.4.0.13 | 5.4.0.13 ✓ |
**Plugins that did NOT update (2) — still on their old versions:**
- **elementor-pro** — claimed 3.32.0, but live site is still on **3.31.1** (CSV even flags an update as available)
- **gravityforms** — claimed 2.9.6, but live site is still on **2.9.4** (also flagged available)
(akismet at 5.5 wasn't part of the update run at all, so it's outside the claim.)
**One-line Todoist status:**
> MainWP update check (2026-10-10 run): 7/9 succeeded — elementor-pro & gravityforms failed, still on 3.31.1 / 2.9.4; retry those two.
Want me to dig into why those two failed, or re-run just them?
Qwen 3.8 FP4 Local, raw (1 Spark)
5/5
48.0 s · 12,128 tokens in / 515 out · $0.0000 · 100% auto-checks
Read the answer
**Comparison — MainWP report vs. live site (acmeplumbing.com):**
**Actually updated (live version matches reported target):**
- elementor → 3.32.0
- breeze → 2.2.19
- wordfence → 8.1.1
- wp-mail-smtp → 4.7.0
- woocommerce → 10.2.2
- wordpress-seo → 26.2 (MainWP logged it as "yoast-seo"; same plugin)
- mainwp-child → 5.4.0.13
**Did NOT update (still on old version, and WP itself flags "update available"):**
- **elementor-pro** — still **3.31.1** (reported as 3.32.0)
- **gravityforms** — still **2.9.4** (reported as 2.9.6)
So MainWP's "all success" is wrong on 2 of 9 — both are premium plugins with available updates, so the update likely failed silently (license/download failure is the common cause).
**Todoist status line I'd post:**
> acmeplumbing.com updates: 7/9 OK — elementor-pro stuck at 3.31.1 and gravityforms at 2.9.4 despite MainWP "success"; needs manual update + license check, then re-verify.
Ornith 1.5 35B (open)
5/5
39.4 s · 11,963 tokens in / 1,500 out · $0.0000 · 100% auto-checks
Read the answer
I compared the MainWP report against the live plugin list. Here's the reconciliation.
**Live vs. reported:** `mainwp-report.json` claims 9/9 updates succeeded. The live CSV shows 7 of those 9 actually landed, and 2 did not.
**✅ Really updated (7):**
| Plugin | Live version |
|---|---|
| elementor | 3.32.0 |
| breeze | 2.2.19 |
| wordfence | 8.1.1 |
| wp-mail-smtp | 4.7.0 |
| woocommerce | 10.2.2 |
| yoast-seo (wordpress-seo) | 26.2 |
| mainwp-child | 5.4.0.13 |
**❌ Did NOT update (2) — MainWP still says success:**
| Plugin | MainWP says | Actually on |
|---|---|---|
| elementor-pro | 3.32.0 | **3.31.1** (update still available) |
| gravityforms | 2.9.6 | **2.9.4** (update still available) |
**One-line Todoist status:**
`acmeplumbing.com: 7/9 MainWP updates verified live; elementor-pro (still 3.31.1) and gravityforms (still 2.9.4) failed, re-run required.`
Ornith 1.5 122B, raw (open)
3.5/5
77.6 s · 12,301 tokens in / 1,788 out · $0.0000 · 100% auto-checks
Read the answer
I compared the MainWP report (`mainwp-report.json`, which claims all 9 updates succeeded) against the live plugin list (`live-plugin-list.csv`). The live list has a `status` column and an actual `version` column — that's the ground truth. Two claimed updates never landed.
## Really updated (7 of 9)
These are on the target version with `status: none` (no update pending):
| Plugin | Live version |
|---|---|
| elementor | 3.32.0 ✓ |
| breeze | 2.2.19 ✓ |
| wordfence | 8.1.1 ✓ |
| wp-mail-smtp | 4.7.0 ✓ |
| woocommerce | 10.2.2 ✓ |
| wordpress-seo (Yoast) | 26.2 ✓ |
| mainwp-child | 5.4.0.13 ✓ |
## Did NOT update (2 of 9)
Still on their **old** version with `status: available` — the update is still sitting there unapplied, despite the "success":
| Plugin | Claimed → | Actually on | Live status |
|---|---|---|---|
| **elementor-pro** | 3.32.0 | **3.31.1** | available |
| **gravityforms** | 2.9.6 | **2.9.4** | available |
Both are the tell: MainWP logged `result: success` but the child site never actually applied them (still flagged `available` rather than `none`).
## One-line Todoist status to post
> ⚠️ acmeplumbing.com update run: 7/9 applied — elementor-pro (3.31.1) and gravityforms (2.9.4) still pending, re-run needed.
One extra note for your ticket: `akismet` (5.5, inactive) shows on the live site but wasn't part of this update run, so I left it out of the count.
Qwen 3.8 Flash, raw (open)
3/5
42.1 s · 11,842 tokens in / 512 out · $0.0000 · 100% auto-checks
Read the answer
Checked `mainwp-report.json` (run 2026-10-10) against `live-plugin-list.csv`. MainWP's "all success" is wrong: it claims 9 updates, but 2 didn't happen.
**Actually updated (live version matches the "to" version):**
- elementor → 3.32.0
- breeze → 2.2.19
- wordfence → 8.1.1
- wp-mail-smtp → 4.7.0
- woocommerce → 10.2.2
- wordpress-seo → 26.2 (MainWP listed it under the wrong slug "yoast-seo", but it did update)
- mainwp-child → 5.4.0.13
**Did NOT update (still on old version, and live shows update "available"):**
- elementor-pro — actually on **3.31.1** (claimed 3.32.0)
- gravityforms — actually on **2.9.4** (claimed 2.9.6)
**Todoist status line I'd post:**
> acmeplumbing.com 10/10 update run: 7/9 OK — elementor-pro stuck at 3.31.1 and gravityforms stuck at 2.9.4 despite MainWP reporting success; needs manual update + WPCS check.
Qwen 3.8 Flash + rules + thinking (open)
2/5
76.8 s · 70,025 tokens in / 1,606 out · $0.0000 · 100% auto-checks
Read the answer
Checked the MainWP report against the live plugin list. The "all success" claim is false: 7 of 9 really updated, 2 did not.
**Really updated (live version matches the report's target):**
- elementor 3.32.0
- breeze 2.2.19
- wordfence 8.1.1
- wp-mail-smtp 4.7.0
- woocommerce 10.2.2
- wordpress-seo 26.2 (MainWP logged this one under slug "yoast-seo", same plugin, version matches)
- mainwp-child 5.4.0.13
**Did NOT update, despite "success":**
- elementor-pro: actually on **3.31.1** (still shows update available; report claimed 3.32.0). This matches the known Elementor Pro "JWT rejected" failure pattern, usually fixed with a donor copy installed as the site user.
- gravityforms: actually on **2.9.4** (still shows update available; report claimed 2.9.6).
**Todoist status line I'd post:**
7 of 9 plugins updated on acmeplumbing.com; Elementor Pro is still on 3.31.1 and Gravity Forms is still on 2.9.4 even though MainWP said both succeeded, so those two still need a manual update and a version re-check before this is done.
Fable 5.1
2/5
12.2 s · 17,651 tokens in / 843 out · $0.0910 · 100% auto-checks
Read the answer
MainWP's "all success" claim is wrong — 7 of the 9 updates actually landed, 2 did not.
**Really updated (live version matches MainWP's "to" version):**
- elementor → 3.32.0
- breeze → 2.2.19
- wordfence → 8.1.1
- wp-mail-smtp → 4.7.0
- woocommerce → 10.2.2
- yoast-seo (live slug `wordpress-seo`) → 26.2
- mainwp-child → 5.4.0.13
**Did NOT update (MainWP reported success, but live site still shows the old version with an update still available):**
- **elementor-pro** — still on **3.31.1** (MainWP claimed 3.32.0)
- **gravityforms** — still on **2.9.4** (MainWP claimed 2.9.6)
Both are licensed/premium plugins, which is the usual reason a MainWP push "succeeds" while the actual download fails (expired or unregistered license key on the site). Note also that Elementor core is now on 3.32.0 while Elementor Pro is stuck on 3.31.1, so the two are version-mismatched — worth verifying the site's Elementor pages render correctly.
**Todoist status line:**
`acmeplumbing.com: 7/9 updates verified live; elementor-pro (3.31.1) and gravityforms (2.9.4) did NOT update despite MainWP "success" — check license keys and re-run manually.`
Qwen 3.8 Flash + my rules (open)
2/5
41.2 s · 69,767 tokens in / 655 out · $0.0000 · 100% auto-checks
Read the answer
Checked the MainWP report against the live plugin list. The claim is wrong for 2 of 9.
**Really updated (7 of 9)** — live version matches the "to" version:
- elementor 3.32.0
- breeze 2.2.19
- mainwp-child 5.4.0.13
- woocommerce 10.2.2
- wordfence 8.1.1
- wp-mail-smtp 4.7.0
- wordpress-seo 26.2 (the report's "yoast-seo" slug is wrong, but the plugin is on 26.2)
**Did NOT update (2 of 9)** — still on the old version, and still flagged "available" (an update is waiting):
- elementor-pro: actually on **3.31.1** (claimed 3.32.0)
- gravityforms: actually on **2.9.4** (claimed 2.9.6)
**Todoist status line I would post:**
"8 of 9 plugins updated on acmeplumbing.com; Elementor Pro (stuck on 3.31.1) and Gravity Forms (stuck on 2.9.4) did NOT update despite MainWP reporting success — both still show a pending update; not marking done."
One thing I could not check from here: *why* those two failed. The usual culprits for exactly these two are a rejected Elementor Pro license (a "JWT rejected" error) and a licensing/activation hiccup on Gravity Forms, but that's a guess, not something this data proves.
Diagnose why site mail lands in spam
Pick: Haiku 5.5
The prompt every model got
Contact-form mail from riverbenddental.com (WordPress, sent through Postmark, From: noreply@riverbenddental.com) is landing in Gmail spam. Gmail 'show original' says: SPF: PASS with IP 50.31.156.6 (smtp.mailfrom=pm_bounces@pm.mtasv.net); DKIM: 'FAIL' signature d=riverbenddental.com, selector 20251001pm; DMARC: FAIL (p=quarantine).
$ dig +short TXT 20251001pm._domainkey.riverbenddental.com
(no answer)
$ dig +short TXT riverbenddental.com
"v=spf1 include:_spf.google.com include:spf.mtasv.net ~all"
$ dig +short TXT _dmarc.riverbenddental.com
"v=DMARC1; p=quarantine; rua=mailto:dmarc@riverbenddental.com"
$ dig +short CNAME pm-bounces.riverbenddental.com
(no answer)
In under 150 words: what is broken, why DMARC fails even though SPF passes, and the exact fix.
Haiku 5.5
5/5
8.7 s · 998 tokens in / 1,689 out · $0.0010 · 100% auto-checks
Read the answer
**Broken:** The DKIM public key isn't published. `20251001pm._domainkey.riverbenddental.com` has no TXT record, so Gmail can't verify the signature.
**Why DMARC fails although SPF passes:** DMARC needs SPF or DKIM to pass *and* align with the From domain. SPF passes, but it checks the envelope sender `pm.mtasv.net`, which doesn't align with `riverbenddental.com`. DKIM is the only path that could align, and it fails. Both fail, so Gmail quarantines the mail.
**Fix:**
1. In Postmark, open the riverbenddental.com sender domain and copy the DKIM TXT value for selector `20251001pm`.
2. In DNS, add TXT `20251001pm._domainkey` with that value exactly as shown (starts with `v=DKIM1; k=rsa; p=`). Don't retype the key.
3. Add CNAME `pm-bounces` → `pm.mtasv.net` so Postmark uses your Return-Path domain.
4. Click Verify in Postmark.
5. Confirm with `dig +short TXT 20251001pm._domainkey.riverbenddental.com`, then send a test to Gmail and check Show Original for DKIM=PASS and DMARC=PASS.
Opus 5.5
5/5
7.4 s · 997 tokens in / 645 out · $0.0209 · 100% auto-checks
Read the answer
**What's broken:** Postmark signs with DKIM selector `20251001pm` for `d=riverbenddental.com`, but no public key is published at `20251001pm._domainkey.riverbenddental.com`. Gmail can't verify the signature, so DKIM fails.
**Why DMARC fails despite SPF passing:** DMARC requires SPF or DKIM to pass *and align* with the From domain. SPF passed for `pm.mtasv.net` (Postmark's bounce domain), not `riverbenddental.com`, so it doesn't count. DKIM is the only aligned path left, and it's failing.
**Fix:**
1. In Postmark → Sender Signatures/Domains → riverbenddental.com, copy the DKIM value and publish it exactly:
`20251001pm._domainkey.riverbenddental.com TXT "k=rsa; p=<key from Postmark>"`
2. Recommended: add the custom Return-Path for SPF alignment:
`pm-bounces.riverbenddental.com CNAME pm.mtasv.net`
3. Click Verify in Postmark, then send a test and confirm `dkim=pass` and `dmarc=pass`.
Fable 5.1
5/5
11.8 s · 996 tokens in / 472 out · $0.0435 · 100% auto-checks
Read the answer
**What's broken:** The DKIM selector record `20251001pm._domainkey.riverbenddental.com` doesn't exist, so Postmark's signature can't be verified → DKIM FAIL. The `pm-bounces` CNAME (Return-Path domain) is also missing.
**Why DMARC fails despite SPF PASS:** DMARC requires *alignment*. SPF passed for `pm_bounces@pm.mtasv.net`, but that domain doesn't match the From header domain `riverbenddental.com`, so SPF is unaligned. DKIM would have aligned (d=riverbenddental.com) but failed. No aligned pass → DMARC FAIL → p=quarantine → spam.
**Fix (in Postmark → Sender Signatures/Domains → riverbenddental.com, copy exact values):**
1. Add TXT `20251001pm._domainkey.riverbenddental.com` → the `k=rsa; p=...` value Postmark shows (verify key wasn't rotated; use the selector Postmark displays).
2. Add CNAME `pm-bounces.riverbenddental.com` → `pm.mtasv.net`, then click Verify so Return-Path becomes `pm_bounces@pm-bounces.riverbenddental.com` (SPF aligned too).
3. Confirm with `dig`, send a test, check "show original" for DKIM/DMARC PASS.
Sonnet 5.5
4/5
5.5 s · 1,000 tokens in / 420 out · $0.0082 · 100% auto-checks
Read the answer
**What's broken:** The DKIM record for Postmark's selector `20251001pm` isn't published. `20251001pm._domainkey.riverbenddental.com` returns nothing, so Gmail can't verify the signature.
**Why DMARC fails despite SPF pass:** SPF passed for `pm_bounces@pm.mtasv.net` (Postmark's Return-Path domain), which doesn't align with the From domain `riverbenddental.com`. DMARC needs SPF *or* DKIM to pass **and align**. SPF is unaligned and DKIM fails, so DMARC fails and `p=quarantine` sends it to spam.
**Fix:**
1. In Postmark → Sender Signatures/Domains → riverbenddental.com, copy the DKIM TXT value for `20251001pm._domainkey`.
2. Add it in DNS: TXT, host `20251001pm._domainkey`, value `k=rsa; p=…` (paste exactly, unbroken).
3. Optional but recommended: add the Return-Path CNAME `pm-bounces` → `pm.mtasv.net`, so SPF aligns too.
4. Click Verify in Postmark, then retest.
If Postmark shows a different selector now, use that one.
84.4 s · 14,198 tokens in / 691 out · $0.0000 · 75% auto-checks
Read the answer
**Broken:** DKIM is missing. Gmail says `20251001pm._domainkey.riverbenddental.com` has no TXT record.
**Why DMARC fails:** SPF only checks the bounce domain here: `pm_bounces@pm.mtasv.net`, not `riverbenddental.com`. So SPF passes, but it is not aligned. DMARC needs a passing, aligned SPF or DKIM. DKIM fails, so DMARC fails.
**Exact fix:** In Postmark, open the sender for `noreply@riverbenddental.com` and add these DNS records:
- TXT `20251001pm._domainkey.riverbenddental.com` = the Postmark public key string shown there
- CNAME `pm-bounces.riverbenddental.com` = the Postmark bounce destination shown there
Qwen 3.8 Flash + rules + thinking (open)
2/5
77.9 s · 14,045 tokens in / 1,729 out · $0.0000 · 75% auto-checks
Read the answer
Broken: Postmark is signing with selector `20251001pm`, but `riverbenddental.com` has no DNS TXT record for it, so DKIM fails.
DMARC fails even though SPF passes because DMARC checks the visible From domain, `riverbenddental.com`. SPF only passed for the hidden bounce domain, `pm.mtasv.net`, so it does not align. With DKIM failing, there is no aligned pass, so DMARC fails and Gmail quarantines.
Fix:
1. In Postmark, verify `riverbenddental.com` and copy its DKIM key.
2. Add DNS TXT:
`20251001pm._domainkey.riverbenddental.com = <value from Postmark>`
3. Confirm it resolves, then send a test and check Gmail shows `DKIM=PASS` and `DMARC=PASS`.
Optional SPF alignment: add the CNAME for `pm-bounces.riverbenddental.com` in Postmark.
Recursive Flint 40B (open)
2/5
132.7 s · 534 tokens in / 2,318 out · $0.0000 · 100% auto-checks
Read the answer
Broken: Missing DKIM public key for selector `20251001pm`. `dig TXT 20251001pm._domainkey.riverbenddental.com` returned nothing, so Gmail/DMARC DKIM failed.
Why DMARC fails: DMARC requires SPF or DKIM aligned with the From domain (`riverbenddental.com`). DKIM failed due to the missing key; SPF passed, but the envelope sender `pm_bounces@pm.mtasv.net` isn’t aligned with `noreply@riverbenddental.com`, so SPF alone doesn’t satisfy DMARC.
Exact fix: In Postmark, enable/configure the `20251001pm` DKIM key and add its public key as:
`20251001pm._domainkey.riverbenddental.com. IN TXT "v=DKIM1; k=rsa; p=..."` using the actual key.
Then verify in Gmail. Optionally tighten DMARC to `p=reject` after monitoring. Ensure From/Return-Path alignment if not relying on DKIM.
Ornith 1.5 122B, raw (open)
2/5
108.1 s · 606 tokens in / 2,679 out · $0.0000 · 100% auto-checks
Read the answer
**What's broken:** Postmark's DKIM public-key DNS record is missing — `20251001pm._domainkey.riverbenddental.com` returns no TXT — so Postmark's DKIM signature can't verify (DKIM FAIL).
**Why DMARC fails even though SPF passes:** SPF is passing on the *envelope* sender `pm_bounces@pm.mtasv.net` (Postmark's bounce domain), **not** on `riverbenddental.com`. DMARC needs an *aligned* pass — the SPF-authenticated domain must match the From: header domain. Since Return-Path ≠ From, SPF isn't aligned and doesn't count. DKIM *is* aligned (d=riverbenddental.com) but fails because its key record is absent. With no aligned pass, DMARC FAILs.
**Exact fix:** In Postmark's dashboard, retrieve the DKIM CNAME for selector `20251001pm` and publish it (`20251001pm._domainkey.riverbenddental.com CNAME …postmarkapp.com`). DKIM then verifies and aligns, satisfying DMARC. Also add Postmark's `pm-bounces` CNAME for proper bounce handling.
Ornith 1.5 122B + rules + thinking (open)
2/5
104.6 s · 6,193 tokens in / 1,939 out · $0.0000 · 75% auto-checks
Read the answer
**Broken:** The DKIM public key is missing. `dig 20251001pm._domainkey.riverbenddental.com` returns no answer, so Gmail can't verify the d=riverbenddental.com signature → DKIM FAIL.
**Why DMARC fails though SPF passes:** DMARC needs a passing check to *align* with the From domain (riverbenddental.com). SPF passed, but for `smtp.mailfrom=pm_bounces@pm.mtasv.net` — Postmark's bounce domain, not riverbenddental.com. The domains don't match, so SPF doesn't satisfy DMARC. DKIM also fails, so nothing aligns → DMARC FAIL.
**Fix:** Add Postmark's DKIM public key as a TXT record at `20251001pm._domainkey.riverbenddental.com`. Once DKIM verifies with `d=riverbenddental.com`, it aligns with the From header and DMARC passes.
Nanbeige 4.3 33B (open)
2/5
801.6 s · 641 tokens in / 10,553 out · $0.0000 · 100% auto-checks
Read the answer
**Broken: DKIM.** Postmark signs with `d=riverbenddental.com`, selector `20251001pm`, but no public key is published — `dig TXT 20251001pm._domainkey.riverbenddental.com` returns empty, so the signature can't verify → DKIM FAIL.
**Why DMARC fails though SPF passes:** SPF only vouches for the *sending IP*. 50.31.156.6 passes via `include:spf.mtasv.net`, which anchors the SPF result to Postmark's `pm.mtasv.net` — not the From domain `riverbenddental.com`. SPF therefore provides no DMARC alignment. DMARC passes only if SPF *or* DKIM aligns the From domain; both fail here, so DMARC fails → `p=quarantine` → Gmail spam.
**Exact fix:** Publish the DKIM public key Postmark generated for selector `20251001pm` as a TXT record at `20251001pm._domainkey.riverbenddental.com` (value from Postmark → DKIM settings). Postmark signs automatically once enabled; no `pm-bounces` CNAME is required. Verify with `dig +short TXT 20251001pm._domainkey.riverbenddental.com`, then re-check "show original" on a test mail. (~130 words)
Qwen 3.8 Flash, raw (open)
2/5
14.9 s · 608 tokens in / 188 out · $0.0000 · 75% auto-checks
Read the answer
**What's broken:** The Postmark DKIM selector `20251001pm` DNS record is missing (empty dig output).
**Why DMARC fails despite SPF:** DMARC requires alignment between the `From:` header domain and either SPF `MailFrom` or DKIM `d=` domain. SPF passed but aligned with `pm.mtasv.net`, not `riverbenddental.com`. Since DKIM also failed due to the missing DNS record, neither authentication method aligned with the `From:` domain, causing DMARC to fail.
**Exact fix:** Add the missing DKIM TXT record to DNS:
```
20251001pm._domainkey.riverbenddental.com IN TXT "k=rsa; p=<Postmark's public key>"
```
Get the exact key from Postmark's sending domain setup panel.
Qwen 3.8 FP4 Local, raw (1 Spark)
2/5
23.3 s · 588 tokens in / 172 out · $0.0000 · 75% auto-checks
Read the answer
**Broken:** The DKIM key is missing. The selector `20251001pm` has no TXT record, so Gmail cannot verify the signature (FAIL), even though the SPF pass authenticates Postmark's IP. DMARC fails because it requires both SPF *and* DKIM to align/pass.
**Fix:** Generate the Postmark DKIM key and publish it.
1. Get the exact key string from Postmark (it matches your domain).
2. Add a TXT record for `20251001pm._domainkey.riverbenddental.com` with value: `"k=rsa; p=<PostmarkPublicKey>"`.
Alternatively, add the CNAME `pm-bounces` to your domain pointing to Postmark's bounce domain if it's not already set.
Ornith 1.5 35B (open)
2/5
24.2 s · 624 tokens in / 992 out · $0.0000 · 100% auto-checks
Read the answer
**What's broken:** the DKIM record for selector `20251001pm` is missing from DNS (the TXT lookup returns no answer). Postmark's DNS-setup page has the value.
**Why DMARC fails even though SPF passes:** DMARC needs an *aligned* identifier, i.e. the domain in the From: header (`riverbenddental.com`) must match the passing check. The SPF pass here is for the bounce envelope sender `pm_bounces@pm.mtasv.net`, so the SPF domain is `pm.mtasv.net` ≠ `riverbenddental.com` → **no SPF alignment**. DKIM is the only way to align, but its signature fails because the selector record doesn't exist. With neither DKIM nor SPF aligned, DMARC fails and Gmail quarantines.
**Exact fix:** create the DKIM record for selector `20251001pm` (name `20251001pm._domainkey.riverbenddental.com`, TXT = the value from Postmark's DNS setup page). That makes DKIM pass and aligns with the From domain, so DMARC passes. Also create the `pm-bounces` CNAME if you want bounce handling. Verify with `dig +short TXT 20251001pm._domainkey.riverbenddental.com`.
Qwen 3.8 Flash + my rules (open)
2/5
17.6 s · 14,010 tokens in / 299 out · $0.0000 · 50% auto-checks
Read the answer
**What's broken:** The DKIM signature can't verify. The DNS TXT record at `20251001pm._domainkey.riverbenddental.com` is missing (dig returns no answer). Postmark signed the mail with that selector, but Gmail can't look up the public key to check it, so the signature fails.
**Why DMARC fails despite SPF passing:** DMARC needs alignment between the `From:` domain and a passing SPF or DKIM result. SPF passed, but it aligned against `pm.mtasv.net` (Postmark's bounce domain), not `riverbenddental.com`. That's not aligned with the From header. DKIM is the only remaining path, and it failed because the key record is gone. With both paths broken, DMARC fails and Gmail quarantines the mail per `p=quarantine`.
**Exact fix:** Copy the DKIM public key from Postmark's sender-settings page (domain verification) and add this record:
```
20251001pm._domainkey.riverbenddental.com. IN TXT "v=DKIM1; k=rsa; p=<the public key from Postmark>"
```
The `pm_bounces` CNAME missing doesn't matter here; it's optional. Once the TXT record resolves, DKIM passes, aligns with the From domain, and DMARC passes.